Important compatibility info
Voltage | 24 V |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Weight | 0.110 kg |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.514 kg |
Outer diameter | 141 mm |
Additional Information 2 | without wheel bearing |
Bolt Hole Circle Diameter | 112 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Width | 91 mm |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Opening Temperature | 80 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal, with temperature sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.12 kg |
Length | 60 mm |
Outer diameter | 39.5 mm. 45.5 mm |
Spanner Size | 17 |
Thread Length | 12 mm |
Number of Connectors / Ports | 1 |
Function | Sensor, oil pressure |
Switch point to | 3 bar |
External Thread Size | M12 x 1,5 |
Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
Weight | 3.248 kg |
Internal Teeth, wheel side | 36 |
External Teeth, Wheel Side | 27 |
Thread Size | M22x1,5 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.8 kg |
Internal Teeth, wheel side | 27 |
Seal Diameter | 99 mm |
External Teeth, Wheel Side | 38 |
Outer diameter | 100 mm |
Length | 168 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Weight | 0.9 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information | without electric motor |
Paired article numbers | 179349 |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 110 mm |
Outer diameter | 47 mm |
Inner diameter | 10 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.515 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Type | Washer Fluid Pump, window cleaning |
Function | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with lock nut |
Paired article numbers | 186570 |
Weight | 1.111 kg |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M12 x 1,5, M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (26097)
- 1x Febi Inner Tie Rod (185895)
Important compatibility info
Weight | 2.950 kg |
Placement on Vehicle | Front Axle |
Length | 412 mm |
Function | Suspension Spring |
Wire Diameter | 13.3 mm |
Type | Suspension Spring |
Outer diameter | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 334 mm |
Placement on Vehicle | both sides |
Stroke | 127 mm |
Housing Diameter | 15 mm |
Eject Force | 270 N |
Housing length | 183.5 mm |
Function | Gas Spring, rear window |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 6 mm |
Weight | 0.133 kg |
Type | Gas Spring, rear window |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.666 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (31416)
- 1x Febi Oil Filter (24661)
- 1x Febi Fuel filter (26820)
- 1x Febi Screw Plug, oil sump (08277)
- 1x Febi Seal Ring, oil drain plug (07215)
Important compatibility info
Additional Information | with fastening/mounting material, without electric motor |
Weight | 0.55 kg |
Function | Window Regulator |
Placement on Vehicle | Left Rear |
Operating Mode | Electric |
Paired article numbers | 108257 |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.204 kg |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 25 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 87 °C |
Function | Thermostat Housing |
Weight | 0.299 kg |
Additional Information 2 | with seal ring |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Weight | 3.24 kg |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174578 |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174577 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Material | Sheet Steel |
Weight | 3.24 kg |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.880 kg |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 303 mm |
Thickness | 39.5 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Weight | 0.93 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 1807.Y3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023