Important compatibility info
Additional Information 2 | with heat shield |
Weight | 0.360 kg |
Width | 240 mm |
Material | Sheet Steel |
Inner diameter | 25 mm |
Function | Gasket, exhaust manifold |
Hole Spacing | 73 mm |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Tie Rod |
Pipe Diameter | 18 mm |
Paired article numbers | 25188 |
Length | 400 mm |
Weight | 1.188 kg |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Type | Washer Fluid Pump, window cleaning |
Function | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 1.650 kg |
Internal Teeth, wheel side | 20 |
Seal Diameter | 55.6 mm |
External Teeth, Wheel Side | 26 |
Outer diameter | 73 mm |
Placement on Vehicle | Wheel Side |
Length | 141 mm |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 06773; 06788 |
Height | 474 mm |
Outer diameter | 302 mm |
Inner diameter | 191 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.12 kg |
Length | 60 mm |
Outer diameter | 39.5 mm. 45.5 mm |
Spanner Size | 17 |
Thread Length | 12 mm |
Number of Connectors / Ports | 1 |
Function | Sensor, oil pressure |
Switch point to | 3 bar |
External Thread Size | M12 x 1,5 |
Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.666 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (31416)
- 1x Febi Oil Filter (24661)
- 1x Febi Fuel filter (26820)
- 1x Febi Screw Plug, oil sump (08277)
- 1x Febi Seal Ring, oil drain plug (07215)
Important compatibility info
Opening Temperature | 87 °C |
Function | Thermostat Housing |
Weight | 0.299 kg |
Additional Information 2 | with seal ring |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Weight | 3.24 kg |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174578 |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174577 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Material | Sheet Steel |
Weight | 3.24 kg |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.880 kg |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 303 mm |
Thickness | 39.5 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.523 kg |
Width of castor bearing surface | 31 mm |
Outer diameter | 63 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.174 kg |
Function | Pressure Converter, exhaust control |
Number of Connectors / Ports | 2 |
for OE number | 98 018 876 80 |
Extra Description | febi Plus |
Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 48 mm |
Outer diameter | 84 mm |
Inner diameter | 49 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Weight | 1.155 kg |
Type | Wheel Bearing Kit |
Additional Information | with gaskets/seals |
Additional Information 2 | with bolts/screws, with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (23657)
- 1x Febi Shaft Seal, wheel bearing (23662)
- 6x Febi Screw (23658)
- 1x Febi Seal Ring, wheel hub (23661)
- 1x Febi Seal, axle cap (23660)
- 1x Febi Cover Plate, dust-cover wheel bearing (23659)
Important compatibility info
Function | Sensor, wheel speed |
Length | 1005 mm |
Number of Connectors / Ports | 2 |
Weight | 0.06 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.55 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 65 mm |
Outer diameter | 120 mm |
Inner diameter | 28 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (22556)
- 1x Febi Cap, wheel bearing (24232)
- 1x Febi Nut (24230)
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 172518 |
Number of Connectors / Ports | 2 |
Cable Length | 670 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.045 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.75 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Function | Diaphragm Brake Cylinder |
Piston Rod Length | 15 mm |
Distance of fastening bolts | 120 mm |
Type | Diaphragm Brake Cylinder |
Brake Type | Disc Brake |
Weight | 2.8 kg |
Parameter | Typ 16 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.034 kg |
Function | Relay, glow plug system |
Number of Connectors / Ports | 6 |
Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023