Important compatibility info
Voltage | 24 V |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Weight | 0.110 kg |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission Type | 5-Speed Manual Transmission |
Weight | 0.478 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Transmission ID | MQ200 |
Inner length 1 | 852 mm |
Outer length 1 | 1221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with trapezoidal tooth profile |
Width | 15 mm |
Number of Teeth | 104 |
Surface | Coated |
Water pump impeller material | Plastic |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 1.054 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11071)
- 1x Febi Water Pump, engine cooling (10600)
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.8 kg |
Internal Teeth, wheel side | 27 |
Seal Diameter | 99 mm |
External Teeth, Wheel Side | 38 |
Outer diameter | 100 mm |
Length | 168 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Repair Set, retarder |
Function | Repair Set, retarder |
Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.666 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (31416)
- 1x Febi Oil Filter (24661)
- 1x Febi Fuel filter (26820)
- 1x Febi Screw Plug, oil sump (08277)
- 1x Febi Seal Ring, oil drain plug (07215)
Important compatibility info
External Thread Size | M22 x 1,5 |
Length | 162 mm |
Internal Teeth, wheel side | 25 |
Outer diameter | 90 mm |
Weight | 2.540 kg |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 30 |
Seal Diameter | 85.6 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Type | Washer Fluid Pump, window cleaning |
Function | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | CR (chloroprene rubber) |
Additional Information 2 | with clamps |
Inner diameter 1 | 49 mm |
Inner diameter 2 | 55 mm |
Weight | 0.445 kg |
Type | Charge Air Hose |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.482 kg |
Material | Plastic |
Colour | Black |
Function | Bracket, expansion tank (coolant) |
Extra Description | febi Plus |
Type | Bracket, expansion tank (coolant) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 69 mm |
Outer diameter 1 | 65 mm |
Function | Charge Air Hose |
Additional Information 2 | with quick couplers |
Turbocharger line | Turbocharger to charge air cooler |
Placement on Vehicle | Charge Air Cooler, Right |
for OE number | 1K0 145 832 B |
Type | Charge Air Hose |
Weight | 0.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Weight | 0.531 kg |
Number of Wings | 6 |
Additional Information 2 | with seal ring |
Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.950 kg |
Placement on Vehicle | Front Axle |
Length | 412 mm |
Function | Suspension Spring |
Wire Diameter | 13.3 mm |
Type | Suspension Spring |
Outer diameter | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with heat shield |
Weight | 0.360 kg |
Width | 240 mm |
Material | Sheet Steel |
Inner diameter | 25 mm |
Function | Gasket, exhaust manifold |
Hole Spacing | 73 mm |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left |
Rod/Strut | Pull Rod |
Paired article numbers | 23965 |
Weight | 0.548 kg |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material, without electric motor |
Weight | 0.55 kg |
Function | Window Regulator |
Placement on Vehicle | Left Rear |
Operating Mode | Electric |
Paired article numbers | 108257 |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 7 |
DIN / ISO | ISO 3731 |
Type | Adaptor, electric filament |
Function | Adaptor, electric filament |
Length | 1200 mm |
Weight | 0.306 kg |
Paired article numbers | 48612 |
Version | OE Standard |
Additional Information 2 | with plug |
Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 1.650 kg |
Internal Teeth, wheel side | 20 |
Seal Diameter | 55.6 mm |
External Teeth, Wheel Side | 26 |
Outer diameter | 73 mm |
Placement on Vehicle | Wheel Side |
Length | 141 mm |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Tie Rod |
Pipe Diameter | 18 mm |
Paired article numbers | 25188 |
Length | 400 mm |
Weight | 1.188 kg |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 1.1 kg |
Outer diameter | 79 mm |
Number of grooves | 10 |
Width of castor bearing surface | 41 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023