Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 110 mm |
| Outer diameter | 47 mm |
| Inner diameter | 10 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.515 kg |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Additional Information 2 | with sensor |
| Weight | 0.25 kg |
| Opening Temperature | 80 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 940 mm |
| Weight | 0.096 kg |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 176139 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Placement on Vehicle | Right |
| Length | 259 mm |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Number of Teeth | 10 |
| Weight | 3.182 kg |
| Outer diameter | 108 mm |
| Screw length below head | 195 mm |
| External Thread Size | M22 x 1,5 |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Type | Suspension, propshaft |
| Length | 210 mm |
| Inner diameter | 30 mm |
| Hole Spacing | 180 mm |
| Function | Suspension, propshaft |
| Weight | 0.575 kg |
| Bearing Type | Rolling Bearing |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod |
| Pipe Diameter | 18 mm |
| Paired article numbers | 25188 |
| Length | 400 mm |
| Weight | 1.188 kg |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 2.950 kg |
| Placement on Vehicle | Front Axle |
| Length | 412 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.3 mm |
| Type | Suspension Spring |
| Outer diameter | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Piston conrod diameter | 8 mm |
| Length | 664 mm |
| Housing Diameter | 19 mm |
| Housing length | 363.5 mm |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 16.5 mm |
| Eject Force | 535 N |
| Stroke | 237 mm |
| Placement on Vehicle | both sides |
| Weight | 0.294 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.331 kg |
| Material | PA (polyamide) |
| Type | Pipe, oil filler neck |
| Function | Pipe, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 3.277 kg |
| Placement on Vehicle | Front Axle |
| Length | 97.6 mm |
| Width | 78.5 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.2 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Type | Repair Set, retarder |
| Function | Repair Set, retarder |
| Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 758 mm |
| Weight | 0.046 kg |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 172609 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Weight | 3.248 kg |
| Internal Teeth, wheel side | 36 |
| External Teeth, Wheel Side | 27 |
| Thread Size | M22x1,5 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.135 kg |
| Voltage | 24 V |
| Operating Mode | Electronic |
| Number of Connectors / Ports | 9 |
| Function | Flasher Unit |
| Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Length | 640 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.1 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.658 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 1.08 kg |
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40368 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (28291)
- 1x Febi Screw (38199)
- 1x Febi Nut (37448)
- 1x Febi Nut (38356)
£40.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left |
| Length | 540 mm |
| Function | Brake Shaft, drum brake |
| Paired article numbers | 07072 |
| Weight | 6.198 kg |
| Type | Brake Shaft, drum brake |
| Outer diameter | 97 mm |
| Number of Teeth | 26 |
| DIN / ISO | 5480 |
| Screw length below head | 491 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Number of Connectors / Ports | 7 |
| DIN / ISO | ISO 3731 |
| Type | Adaptor, electric filament |
| Function | Adaptor, electric filament |
| Length | 1200 mm |
| Weight | 0.306 kg |
| Paired article numbers | 48612 |
| Version | OE Standard |
| Additional Information 2 | with plug |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Function | Gasket Kit, cylinder head |
| for OE number | 541 016 13 20 S1 |
| Type | Gasket Kit, cylinder head |
| Weight | 1.927 kg |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head (39484)
- 1x Febi Gasket, intake manifold (21911)
- 1x Febi Gasket, exhaust manifold (30615)
- 1x Febi Gasket, cylinder head cover (28685)
- 2x Febi Screw (46116)
- 4x Febi Cylinder Head Bolt (12200)
£40.43
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023