Proud to be a UK-based company
Contact us
Important compatibility info
| Switch point to | 10 bar |
| Function | Oil Pressure Switch |
| Control Range | 0,7 +/- 0,15 bar |
| Number of Connectors / Ports | 2 |
| Outer diameter | 46 mm. 39.8 mm |
| Length | 80 mm |
| Weight | 0.123 kg |
| Spanner Size | 19 |
| External Thread Size | M14 x 1,5 |
| Thread Length | 12 mm |
| Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Additional Information 2 | with sensor |
| Weight | 0.25 kg |
| Opening Temperature | 80 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 940 mm |
| Weight | 0.096 kg |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 176139 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Type | Suspension, propshaft |
| Length | 210 mm |
| Inner diameter | 30 mm |
| Hole Spacing | 180 mm |
| Function | Suspension, propshaft |
| Weight | 0.575 kg |
| Bearing Type | Rolling Bearing |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Replaces | 06773; 06788 |
| Height | 474 mm |
| Outer diameter | 302 mm |
| Inner diameter | 191 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.12 kg |
| Length | 60 mm |
| Outer diameter | 39.5 mm. 45.5 mm |
| Spanner Size | 17 |
| Thread Length | 12 mm |
| Number of Connectors / Ports | 1 |
| Function | Sensor, oil pressure |
| Switch point to | 3 bar |
| External Thread Size | M12 x 1,5 |
| Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Function | Gasket Kit, cylinder head |
| for OE number | 541 016 13 20 S1 |
| Type | Gasket Kit, cylinder head |
| Weight | 1.927 kg |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head (39484)
- 1x Febi Gasket, intake manifold (21911)
- 1x Febi Gasket, exhaust manifold (30615)
- 1x Febi Gasket, cylinder head cover (28685)
- 2x Febi Screw (46116)
- 4x Febi Cylinder Head Bolt (12200)
£40.43
Important compatibility info
| Weight | 3.170 kg |
| Height | 507 mm |
| Outer diameter | 265 mm |
| Inner diameter | 160 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 2.950 kg |
| Placement on Vehicle | Front Axle |
| Length | 412 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.3 mm |
| Type | Suspension Spring |
| Outer diameter | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.331 kg |
| Material | PA (polyamide) |
| Type | Pipe, oil filler neck |
| Function | Pipe, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 758 mm |
| Weight | 0.046 kg |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 172609 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Weight | 3.248 kg |
| Internal Teeth, wheel side | 36 |
| External Teeth, Wheel Side | 27 |
| Thread Size | M22x1,5 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Opening Temperature | 87 °C |
| Function | Thermostat Housing |
| Weight | 0.299 kg |
| Additional Information 2 | with seal ring |
| Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.42
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Weight | 3.24 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174578 |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.41
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174577 |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Material | Sheet Steel |
| Weight | 3.24 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.41
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.75 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.39
Important compatibility info
| Weight | 0.366 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 76.5 mm |
| Material | Metal |
| Width | 46 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.39
Important compatibility info
| Number of Connectors / Ports | 2 |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Weight | 0.325 kg |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal, with temperature sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.39
Important compatibility info
| Weight | 0.523 kg |
| Width of castor bearing surface | 31 mm |
| Outer diameter | 63 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.39
Important compatibility info
| Weight | 0.034 kg |
| Function | Relay, glow plug system |
| Number of Connectors / Ports | 6 |
| Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.39
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023