Important compatibility info
Weight | 1.22 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32122)
- 1x Febi Air Filter (30992)
- 4x Febi Spark Plug (13536)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (32368)
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Weight | 1.0 kg |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber, Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Length | 259 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Number of Teeth | 10 |
Weight | 3.182 kg |
Outer diameter | 108 mm |
Screw length below head | 195 mm |
External Thread Size | M22 x 1,5 |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Tie Rod |
Pipe Diameter | 18 mm |
Paired article numbers | 25188 |
Length | 400 mm |
Weight | 1.188 kg |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Front Axle Right |
Paired article numbers | 07073 |
Weight | 6.23 kg |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Length | 540 mm |
Outer diameter | 97 mm |
Number of Teeth | 26 |
DIN / ISO | 5480 |
Screw length below head | 491 mm |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material, without electric motor |
Weight | 0.55 kg |
Function | Window Regulator |
Placement on Vehicle | Left Rear |
Operating Mode | Electric |
Paired article numbers | 108257 |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.135 kg |
Voltage | 24 V |
Operating Mode | Electronic |
Number of Connectors / Ports | 9 |
Function | Flasher Unit |
Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 55 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Outer diameter | 90 mm |
Inner diameter | 55 mm |
Weight | 1.301 kg |
Bearing Type | Tapered Roller Bearing |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Switch point to | 10 bar |
Function | Oil Pressure Switch |
Control Range | 0,7 +/- 0,15 bar |
Number of Connectors / Ports | 2 |
Outer diameter | 46 mm. 39.8 mm |
Length | 80 mm |
Weight | 0.123 kg |
Spanner Size | 19 |
External Thread Size | M14 x 1,5 |
Thread Length | 12 mm |
Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with sensor |
Weight | 0.25 kg |
Opening Temperature | 80 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 940 mm |
Weight | 0.096 kg |
Number of Connectors / Ports | 2 |
Paired article numbers | 176139 |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 87 °C |
Function | Thermostat Housing |
Weight | 0.299 kg |
Additional Information 2 | with seal ring |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Weight | 3.24 kg |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174578 |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174577 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Material | Sheet Steel |
Weight | 3.24 kg |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.7 kg |
Outer diameter | 60 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 25 mm |
for OE number | 16 138 400 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.192 kg |
Function | Ignition Coil |
Type | Ignition Coil |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.460 kg |
Material | PE (Polyethylene) |
Colour | White |
Function | Washer Fluid Reservoir, window cleaning |
Extra Description | febi Plus |
Type | Washer Fluid Reservoir, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.564 kg |
Inner Length | 700 mm |
Outer Length | 1020 mm |
Type | Cable Pull, clutch control |
Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 48 mm |
Outer diameter | 84 mm |
Inner diameter | 49 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Weight | 1.155 kg |
Type | Wheel Bearing Kit |
Additional Information | with gaskets/seals |
Additional Information 2 | with bolts/screws, with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (23657)
- 1x Febi Shaft Seal, wheel bearing (23662)
- 6x Febi Screw (23658)
- 1x Febi Seal Ring, wheel hub (23661)
- 1x Febi Seal, axle cap (23660)
- 1x Febi Cover Plate, dust-cover wheel bearing (23659)
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 172518 |
Number of Connectors / Ports | 2 |
Cable Length | 670 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.045 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023