Important compatibility info
Weight | 1.820 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 24417 |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with lock nut |
Paired article numbers | 186570 |
Weight | 1.111 kg |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M12 x 1,5, M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (26097)
- 1x Febi Inner Tie Rod (185895)
Important compatibility info
Weight | 1.094 kg |
Placement on Vehicle | Rear Axle Left, Rear, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 46422 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 158 mm |
Internal Teeth, wheel side | 25 |
Weight | 2.320 kg |
Number of Teeth, ABS ring | 46 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Outer diameter | 87.5 mm |
External Teeth, Wheel Side | 27 |
Seal Diameter | 60 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 29633 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.66 kg |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 29423 |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 4.25 kg |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 172528 |
Placement on Vehicle | Front Axle Right |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 1040 mm |
Weight | 0.104 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.800 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 64.4 mm |
Outer diameter | 120 mm |
Inner diameter | 30 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 61 7 516 007 |
Weight | 0.348 kg |
Material | Plastic |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.155 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Steering arm type | Control Arm |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38609)
- 1x Febi Nut, stabiliser bar (22264)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 452 mm |
Weight | 2.6 kg |
Outer diameter | 168 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Number of Coils | 5.8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Filter type | In-Line Filter, with water drain screw |
Outer diameter | 79 mm |
Height | 179 mm |
Weight | 0.28 kg |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Type | Tie Rod End |
Spanner Size | 24 |
Function | Tie Rod End |
External Thread Size | M14 x 1,5 |
Paired article numbers | 183508 |
Weight | 0.649 kg |
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Right |
Length | 221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 696 mm |
Weight | 0.2 kg |
Housing Diameter | 19 mm |
Eject Force | 630 N |
Stroke | 163 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 488 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with heat shield |
Weight | 0.360 kg |
Width | 240 mm |
Material | Sheet Steel |
Inner diameter | 25 mm |
Function | Gasket, exhaust manifold |
Hole Spacing | 73 mm |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.145 kg |
Length | 235 mm |
Width | 433 mm |
Thickness | 127.5 mm |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Type | Expansion Tank, coolant |
Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Weight | 0.318 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 24 mm |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.787 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from thermostat to radiator |
Function | Radiator Hose |
Weight | 0.343 kg |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Hose Length | 263 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Additional Information 2 | with quick couplers |
Weight | 0.338 kg |
Placement on Vehicle | Charge Air Cooler, Right |
Function | Charge Air Hose |
Type | Charge Air Hose |
Turbocharger line | Turbocharger to piping |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023