Important compatibility info
Weight | 0.666 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (31416)
- 1x Febi Oil Filter (24661)
- 1x Febi Fuel filter (26820)
- 1x Febi Screw Plug, oil sump (08277)
- 1x Febi Seal Ring, oil drain plug (07215)
Important compatibility info
Weight | 3.170 kg |
Height | 507 mm |
Outer diameter | 265 mm |
Inner diameter | 160 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Tie Rod |
Pipe Diameter | 18 mm |
Paired article numbers | 25188 |
Length | 400 mm |
Weight | 1.188 kg |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission Type | 5-Speed Manual Transmission |
Weight | 0.478 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Transmission ID | MQ200 |
Inner length 1 | 852 mm |
Outer length 1 | 1221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.265 kg |
Length | 3730 mm |
Outer diameter | 8.5 mm |
Inner diameter | 4.2 mm |
Pressure | 400 bar |
Function | Hose Line, driver cab tilting device |
External Thread Size | M14 x 1,5 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.482 kg |
Material | Plastic |
Colour | Black |
Function | Bracket, expansion tank (coolant) |
Extra Description | febi Plus |
Type | Bracket, expansion tank (coolant) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 158 mm |
Internal Teeth, wheel side | 25 |
Weight | 2.320 kg |
Number of Teeth, ABS ring | 46 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Outer diameter | 87.5 mm |
External Teeth, Wheel Side | 27 |
Seal Diameter | 60 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 69 mm |
Outer diameter 1 | 65 mm |
Function | Charge Air Hose |
Additional Information 2 | with quick couplers |
Turbocharger line | Turbocharger to charge air cooler |
Placement on Vehicle | Charge Air Cooler, Right |
for OE number | 1K0 145 832 B |
Type | Charge Air Hose |
Weight | 0.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Switch point to | 10 bar |
Function | Oil Pressure Switch |
Control Range | 0,7 +/- 0,15 bar |
Number of Connectors / Ports | 2 |
Outer diameter | 46 mm. 39.8 mm |
Length | 80 mm |
Weight | 0.123 kg |
Spanner Size | 19 |
External Thread Size | M14 x 1,5 |
Thread Length | 12 mm |
Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Weight | 0.9 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information | without electric motor |
Paired article numbers | 179349 |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.331 kg |
Material | PA (polyamide) |
Type | Pipe, oil filler neck |
Function | Pipe, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 44 |
External Thread Size | M24 x 1,5 |
Length | 157 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 2.780 kg |
Internal Teeth, wheel side | 36 |
Seal Diameter | 65 mm |
External Teeth, Wheel Side | 31 |
Outer diameter | 93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with trapezoidal tooth profile |
Width | 15 mm |
Number of Teeth | 104 |
Surface | Coated |
Water pump impeller material | Plastic |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 1.054 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11071)
- 1x Febi Water Pump, engine cooling (10600)
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 21455 |
Placement on Vehicle | Lower Front Axle, Right Rear |
Weight | 1.640 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 20 mm |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with ball joint, with bearing |
Additional Information | with lock nut |
Cone Size | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (02682)
Important compatibility info
Weight | 2.204 kg |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 25 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 749 mm |
Weight | 0.045 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with adjuster |
Weight | 0.365 kg |
Type | Tailgate Lock |
Function | Tailgate Lock |
Extra Description | febi Plus |
for OE number | 8P3 827 505 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Door Check |
Mounting points diameter | 11 mm |
Type | Door Check |
Weight | 0.56 kg |
Length | 172 mm |
Placement on Vehicle | Left |
Mounting bores distance | 107 mm. 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Number of Connectors / Ports | 2 |
Weight | 0.01 kg |
Type | Sensor, coolant temperature |
Function | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 696 mm |
Weight | 0.2 kg |
Housing Diameter | 19 mm |
Eject Force | 630 N |
Stroke | 163 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 488 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023