Important compatibility info
Weight | 0.955 kg |
Type | Repair Kit, kingpin |
Additional Information | with Thrust Bearing |
Additional Information 2 | with bearing |
Inner diameter | 50 mm |
Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, steering knuckle (34565)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (05868)
- 1x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Seal Ring, steering knuckle (15795)
Important compatibility info
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Weight | 0.318 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.08 kg |
Cable Length | 1865 mm |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 179123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Weight | 1.095 kg |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (21110)
- 1x Febi Filter, cabin air (09446)
- 4x Febi Spark Plug (13533)
- 1x Febi Screw Plug, oil sump (15374)
- 1x Febi Fuel filter (21626)
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from thermostat to radiator |
Function | Radiator Hose |
Weight | 0.343 kg |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Hose Length | 263 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left |
Rod/Strut | Pull Rod |
Paired article numbers | 23965 |
Weight | 0.548 kg |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 22 |
Weight | 1.972 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Max. Length | 337 mm |
Min. Length | 237 mm |
Pipe Diameter | 43 mm. 56 mm |
Piston conrod diameter | 13 mm |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 15952 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 3.200 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 215 mm |
Inner diameter | 177 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Steel |
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Weight | 1.17 kg |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 61 7 516 007 |
Weight | 0.348 kg |
Material | Plastic |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 29633 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.66 kg |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 60 mm |
Function | Tensioner Pulley, timing belt |
Weight | 0.296 kg |
Width of castor bearing surface | 26 mm |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.200 kg |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 15951 |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 24 mm |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.787 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.82 kg |
Function | Seal, windscreen |
Type | Seal, windscreen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.092 kg |
Width | 60.5 mm |
Outer diameter | 20 mm |
Function | Tensioner, timing chain |
for OE number | 1 662 847 |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 60 mm |
Material | Plastic |
Width of castor bearing surface | 26 mm |
Weight | 0.115 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.204 kg |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 25 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.331 kg |
Placement on Vehicle | both sides |
Length | 553 mm |
Housing Diameter | 18 mm |
Eject Force | 760 N |
Stroke | 176 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 348 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023