Important compatibility info
External Teeth, Wheel Side | 28 |
Placement on Vehicle | Wheel Side, Front Axle |
Seal Diameter | 50 mm |
Type | Joint Kit, drive shaft |
Weight | 3.440 kg |
Outer diameter | 99 mm |
Length | 221 mm |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 12562 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.515 kg |
Steering arm type | Control Arm |
Material | Cast Steel |
Placement on Vehicle | Upper Front Axle, Right |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of mounting bores | 3 |
Function | Central Slave Cylinder, clutch |
Type | Central Slave Cylinder, clutch |
for OE number | 56 79 355 |
Weight | 0.370 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Type | Tie Rod End |
Spanner Size | 24 |
Function | Tie Rod End |
External Thread Size | M14 x 1,5 |
Paired article numbers | 183508 |
Weight | 0.649 kg |
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Right |
Length | 221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.76 kg |
Placement on Vehicle | Front Axle |
Length | 346 mm |
Outer diameter | 135 mm. 96 mm |
Function | Suspension Spring |
Wire Diameter | 14 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 61 7 516 007 |
Weight | 0.348 kg |
Material | Plastic |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.094 kg |
Placement on Vehicle | Rear Axle Left, Rear, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 46422 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Turbocharger line | Piping to charge air cooler |
Material | ACM (Polyacrylate) |
Function | Charge Air Hose |
Placement on Vehicle | Charge Air Cooler, Left |
Additional Information 2 | with quick couplers |
Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Filter type | In-Line Filter, with water drain screw |
Outer diameter | 79 mm |
Height | 179 mm |
Weight | 0.28 kg |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.265 kg |
Length | 3730 mm |
Outer diameter | 8.5 mm |
Inner diameter | 4.2 mm |
Pressure | 400 bar |
Function | Hose Line, driver cab tilting device |
External Thread Size | M14 x 1,5 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with trapezoidal tooth profile |
Width | 15 mm |
Number of Teeth | 104 |
Surface | Coated |
Water pump impeller material | Plastic |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 1.054 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11071)
- 1x Febi Water Pump, engine cooling (10600)
Important compatibility info
Stroke | 120 mm |
Function | Gas Spring, bonnet |
Type | Gas Spring, bonnet |
Piston conrod diameter | 8 mm |
Housing Diameter | 18 mm |
Eject Force | 530 N |
Mounting points diameter | 18 mm |
Placement on Vehicle | both sides |
Weight | 0.2 kg |
Additional Information | Change interval/date according to gas spring imprint |
Housing length | 281 mm |
Length | 475 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1 381 495 |
Number of mounting bores | 6 |
Mounting points diameter | 9 mm |
Function | Thermostat Housing |
Weight | 0.400 kg |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left |
Rod/Strut | Pull Rod |
Paired article numbers | 23965 |
Weight | 0.548 kg |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.094 kg |
Placement on Vehicle | Rear Axle Right, Rear, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 46421 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 215 mm |
Inner diameter | 177 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Steel |
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Weight | 1.17 kg |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 15952 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 3.200 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Material | Aluminium |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 13 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Additional Information 2 | with quick couplers |
Weight | 0.338 kg |
Placement on Vehicle | Charge Air Cooler, Right |
Function | Charge Air Hose |
Type | Charge Air Hose |
Turbocharger line | Turbocharger to piping |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 2N0 412 303 H S1 |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.680 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187821)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023