Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 215 mm |
| Inner diameter | 177 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Weight | 1.17 kg |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Wire Diameter | 12.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 362 mm |
| Function | Suspension Spring |
| Number of Coils | 4.8 |
| Weight | 2.02 kg |
| Type | Suspension Spring |
| Outer diameter | 156 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Length | 334 mm |
| Placement on Vehicle | both sides |
| Stroke | 127 mm |
| Housing Diameter | 15 mm |
| Eject Force | 270 N |
| Housing length | 183.5 mm |
| Function | Gas Spring, rear window |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Weight | 0.133 kg |
| Type | Gas Spring, rear window |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Additional Information 2 | with heat shield |
| Weight | 0.360 kg |
| Width | 240 mm |
| Material | Sheet Steel |
| Inner diameter | 25 mm |
| Function | Gasket, exhaust manifold |
| Hole Spacing | 73 mm |
| Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Paired article numbers | 174666 |
| Placement on Vehicle | Lower, Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Weight | 2.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Function | Fuel filter |
| Filter type | In-Line Filter, with water drain screw |
| Outer diameter | 79 mm |
| Height | 179 mm |
| Weight | 0.28 kg |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 0.092 kg |
| Width | 60.5 mm |
| Outer diameter | 20 mm |
| Function | Tensioner, timing chain |
| for OE number | 1 662 847 |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 749 mm |
| Weight | 0.045 kg |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 2.204 kg |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with lock nut |
| Paired article numbers | 186570 |
| Weight | 1.111 kg |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M12 x 1,5, M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (26097)
- 1x Febi Inner Tie Rod (185895)
£39.44
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Additional Information 2 | with quick couplers |
| Weight | 0.338 kg |
| Placement on Vehicle | Charge Air Cooler, Right |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Turbocharger line | Turbocharger to piping |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 1.094 kg |
| Placement on Vehicle | Rear Axle Left, Rear, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 46422 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Length | 158 mm |
| Internal Teeth, wheel side | 25 |
| Weight | 2.320 kg |
| Number of Teeth, ABS ring | 46 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
| Outer diameter | 87.5 mm |
| External Teeth, Wheel Side | 27 |
| Seal Diameter | 60 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Outer diameter | 60 mm |
| Function | Tensioner Pulley, timing belt |
| Weight | 0.296 kg |
| Width of castor bearing surface | 26 mm |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 24 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.787 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 1.82 kg |
| Function | Seal, windscreen |
| Type | Seal, windscreen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Height | 79 mm |
| Outer diameter | 89.5 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 64 |
| Weight | 0.165 kg |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Length | 240 mm |
| Weight | 3.200 kg |
| Rod/Strut | Coupling Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 36 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Diameter | 36 mm |
| Material | Steel |
| Thickness | 179 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 60 mm |
| Material | Plastic |
| Width of castor bearing surface | 26 mm |
| Weight | 0.115 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Weight | 0.265 kg |
| Length | 3730 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 4.2 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| External Thread Size | M14 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023