Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.049 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 783 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.658 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 749 mm |
| Weight | 0.045 kg |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Belts | with trapezoidal tooth profile |
| Width | 15 mm |
| Number of Teeth | 104 |
| Surface | Coated |
| Water pump impeller material | Plastic |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.054 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11071)
- 1x Febi Water Pump, engine cooling (10600)
£40.43
Important compatibility info
| Piston conrod diameter | 8 mm |
| Length | 664 mm |
| Housing Diameter | 19 mm |
| Housing length | 363.5 mm |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 16.5 mm |
| Eject Force | 535 N |
| Stroke | 237 mm |
| Placement on Vehicle | both sides |
| Weight | 0.294 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Additional Information 2 | with heat shield |
| Weight | 0.360 kg |
| Width | 240 mm |
| Material | Sheet Steel |
| Inner diameter | 25 mm |
| Function | Gasket, exhaust manifold |
| Hole Spacing | 73 mm |
| Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.25 kg |
| Opening Temperature | 80 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal, with temperature sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod |
| Pipe Diameter | 18 mm |
| Paired article numbers | 25188 |
| Length | 400 mm |
| Weight | 1.188 kg |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Type | Repair Set, retarder |
| Function | Repair Set, retarder |
| Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Weight | 0.531 kg |
| Number of Wings | 6 |
| Additional Information 2 | with seal ring |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.666 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (31416)
- 1x Febi Oil Filter (24661)
- 1x Febi Fuel filter (26820)
- 1x Febi Screw Plug, oil sump (08277)
- 1x Febi Seal Ring, oil drain plug (07215)
£40.43
Important compatibility info
| Weight | 0.331 kg |
| Material | PA (polyamide) |
| Type | Pipe, oil filler neck |
| Function | Pipe, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 2.950 kg |
| Placement on Vehicle | Front Axle |
| Length | 412 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.3 mm |
| Type | Suspension Spring |
| Outer diameter | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Replaces | 06773; 06788 |
| Height | 474 mm |
| Outer diameter | 302 mm |
| Inner diameter | 191 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.482 kg |
| Material | Plastic |
| Colour | Black |
| Function | Bracket, expansion tank (coolant) |
| Extra Description | febi Plus |
| Type | Bracket, expansion tank (coolant) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Number of Connectors / Ports | 7 |
| DIN / ISO | ISO 3731 |
| Type | Adaptor, electric filament |
| Function | Adaptor, electric filament |
| Length | 1200 mm |
| Weight | 0.306 kg |
| Paired article numbers | 48612 |
| Version | OE Standard |
| Additional Information 2 | with plug |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Transmission Type | 5-Speed Manual Transmission |
| Weight | 0.478 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Transmission ID | MQ200 |
| Inner length 1 | 852 mm |
| Outer length 1 | 1221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Length | 162 mm |
| Internal Teeth, wheel side | 25 |
| Outer diameter | 90 mm |
| Weight | 2.540 kg |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 30 |
| Seal Diameter | 85.6 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Material | CR (chloroprene rubber) |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 49 mm |
| Inner diameter 2 | 55 mm |
| Weight | 0.445 kg |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Switch point to | 10 bar |
| Function | Oil Pressure Switch |
| Control Range | 0,7 +/- 0,15 bar |
| Number of Connectors / Ports | 2 |
| Outer diameter | 46 mm. 39.8 mm |
| Length | 80 mm |
| Weight | 0.123 kg |
| Spanner Size | 19 |
| External Thread Size | M14 x 1,5 |
| Thread Length | 12 mm |
| Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023