Important compatibility info
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Weight | 0.318 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.578 kg |
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 72 mm |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Additional Information 2 | with grease cap |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (170375)
- 1x Febi Cap, wheel bearing (24232)
- 1x Febi Nut (24230)
- 1x Febi Bolt, brake disc (04511)
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 29423 |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 4.25 kg |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with lock nut |
Paired article numbers | 186570 |
Weight | 1.111 kg |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M12 x 1,5, M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (26097)
- 1x Febi Inner Tie Rod (185895)
Important compatibility info
Additional Information 2 | with heat shield |
Weight | 0.360 kg |
Width | 240 mm |
Material | Sheet Steel |
Inner diameter | 25 mm |
Function | Gasket, exhaust manifold |
Hole Spacing | 73 mm |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 2N0 412 303 H S1 |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.680 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187821)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
Important compatibility info
Weight | 0.6 kg |
Material | Aluminium |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 13 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.265 kg |
Length | 3730 mm |
Outer diameter | 8.5 mm |
Inner diameter | 4.2 mm |
Pressure | 400 bar |
Function | Hose Line, driver cab tilting device |
External Thread Size | M14 x 1,5 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.155 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Steering arm type | Control Arm |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38609)
- 1x Febi Nut, stabiliser bar (22264)
Important compatibility info
Paired article numbers | 12562 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.515 kg |
Steering arm type | Control Arm |
Material | Cast Steel |
Placement on Vehicle | Upper Front Axle, Right |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.800 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 64.4 mm |
Outer diameter | 120 mm |
Inner diameter | 30 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 24 mm |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.787 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Max. Length | 337 mm |
Min. Length | 237 mm |
Pipe Diameter | 43 mm. 56 mm |
Piston conrod diameter | 13 mm |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 29422 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 4.013 kg |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 215 mm |
Inner diameter | 177 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Steel |
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Weight | 1.17 kg |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.515 kg |
Steering arm type | Control Arm |
Material | Cast Steel |
Placement on Vehicle | Upper Front Axle, Left |
Paired article numbers | 12563 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 158 mm |
Internal Teeth, wheel side | 25 |
Weight | 2.320 kg |
Number of Teeth, ABS ring | 46 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Outer diameter | 87.5 mm |
External Teeth, Wheel Side | 27 |
Seal Diameter | 60 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 60 mm |
Material | Plastic |
Width of castor bearing surface | 26 mm |
Weight | 0.115 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.056 kg |
Type | Oil Jet, piston underside cooling |
Function | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1 381 495 |
Number of mounting bores | 6 |
Mounting points diameter | 9 mm |
Function | Thermostat Housing |
Weight | 0.400 kg |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Paired article numbers | 174666 |
Placement on Vehicle | Lower, Front Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Steering arm type | Control Arm |
Weight | 2.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from heat exchanger to engine |
Function | Radiator Hose |
Weight | 0.434 kg |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.094 kg |
Placement on Vehicle | Rear Axle Left, Rear, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 46422 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.438 kg |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Width | 59 mm |
Length | 87 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (176337)
- 2x Febi Protective Cap/Bellow, shock absorber (175559)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18 mm |
Paired article numbers | 174283 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Weight | 3.015 kg |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 452 mm |
Weight | 2.6 kg |
Outer diameter | 168 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Number of Coils | 5.8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.540 kg |
Bore Diameter | 19 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.820 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 24417 |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 61 7 516 007 |
Weight | 0.348 kg |
Material | Plastic |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 172528 |
Placement on Vehicle | Front Axle Right |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 1040 mm |
Weight | 0.104 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left |
Rod/Strut | Pull Rod |
Paired article numbers | 23965 |
Weight | 0.548 kg |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Weight | 1.095 kg |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (21110)
- 1x Febi Filter, cabin air (09446)
- 4x Febi Spark Plug (13533)
- 1x Febi Screw Plug, oil sump (15374)
- 1x Febi Fuel filter (21626)
Important compatibility info
Weight | 0.26 kg |
Turbocharger line | Piping to charge air cooler |
Material | ACM (Polyacrylate) |
Function | Charge Air Hose |
Placement on Vehicle | Charge Air Cooler, Left |
Additional Information 2 | with quick couplers |
Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 29633 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.66 kg |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.204 kg |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 25 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Type | Washer Fluid Pump, window cleaning |
Function | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.0 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 280 mm |
Thickness | 65 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Mounting points diameter | 15 mm |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, automatic transmission |
Weight | 0.463 kg |
Placement on Vehicle | Rear |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 12558 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holders, with rubber mounts |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.642 kg |
Placement on Vehicle | Left |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 6Q0 199 555 AT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Placement on Vehicle | Front Axle Right, Lower |
Steering arm type | Control Arm |
Paired article numbers | 12559 |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.659 kg |
Material | Aluminium |
Number of Ribs | 18 |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.096 kg |
Placement on Vehicle | Front |
Colour | Black |
Function | Cupholder |
Extra Description | febi Plus |
Type | Cupholder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut, with rubber mounts |
Additional Information 2 | with ball joint |
Weight | 1.360 kg |
Placement on Vehicle | Upper Front Axle, Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 23755 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Ignition Coil | 2 Spark |
Colour Coding | Black |
Function | Ignition Coil |
Weight | 0.46 kg |
Type | Ignition Coil |
Placement on Vehicle | for cylinder 1-4 |
for OE number | 77 00 100 589 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.043 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 624 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.658 kg |
Function | V-Ribbed Belt Set |
Type | V-Ribbed Belt Set |
Length | 800 mm |
Number of Ribs | 6 |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Width of castor bearing surface | 25.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38250)
- 1x Febi Belt Tensioner, v-ribbed belt (22369)
Important compatibility info
Function | Ignition Coil |
Type | Ignition Coil |
Number of Connectors / Ports | 4 |
Colour | Red |
Weight | 0.22 kg |
Replaces | 36359 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.400 kg |
Housing length | 365 mm |
Mounting points diameter | 18 mm |
Placement on Vehicle | Right Rear |
Length | 564 mm |
Eject Force | 620 N |
Stroke | 155 mm |
Housing Diameter | 19 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.801 kg |
Function | Repair Kit, oil sump |
Extra Description | febi Plus |
Type | Repair Kit, oil sump |
Seal Material | Rubber/Metal |
Wet Sump Material | Steel |
Additional Information 2 | with oil sump gasket |
Additional Information | with oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (04592)
- 1x Febi Gasket, oil sump (21734)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023