Important compatibility info
Function | Repair Kit, brake camshaft |
Type | Repair Kit, brake camshaft |
Weight | 0.332 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (19002)
- 2x Febi Shaft Seal, brake camshaft (19003)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (19004)
Important compatibility info
Weight | 0.25 kg |
Extra Description | febi Plus |
Additional Information 2 | with switch, with bolts/screws |
Function | Steering Lock |
Number of Connectors / Ports | 5 |
Type | Steering Lock |
Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.3 kg |
Placement on Vehicle | Front Axle |
Length | 434 mm |
Outer diameter | 171 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Wire Diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.471 kg |
Material | MVQ (silicone rubber) |
Outer diameter | 94 mm |
Inner diameter | 88 mm |
Function | Charge Air Hose |
Colour | Blue |
Type | Charge Air Hose |
Hose Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.094 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 70 mm |
Thickness | 90 mm |
Inner diameter | 12 mm |
Function | Bush Set, axle beam |
Type | Bush Set, axle beam |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (31694)
- 2x Febi Bolt, axle beam mounting (26142)
- 2x Febi Nut (14392)
Important compatibility info
Placement on Vehicle | Right Front |
Operating Mode | Manual |
Paired article numbers | 14722 |
Function | Window Regulator |
Weight | 1.63 kg |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 64.5 mm. 42.5 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 12 mm |
Function | Shock Absorber, driver cab suspension |
Max. Length | 337 mm |
Min. Length | 228 mm |
Weight | 1.924 kg |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Placement on Vehicle | Left Front, Right Front |
Operating Mode | Mechanical |
Type | Shock Absorber, driver cab suspension |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.78 kg |
Length | 125 mm |
Width | 68 mm |
Thickness | 126 mm |
Thread Type | with left-hand thread |
Cone Size | 27 mm |
Function | Angled Ball Joint, steering push rod |
External Thread Size | M30 x 1,5, M24 x 1,5 |
Type | Angled Ball Joint, steering push rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.4 kg |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Hose Length | 118 mm |
Material | Silicone |
Inner diameter | 60 mm |
Colour | Blue |
Function | Radiator Hose |
Type | Radiator Hose |
Wall Thickness | 6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 32 mm |
Weight | 0.195 kg |
Cooling Hose | from engine to thermostat |
Type | Radiator Hose |
Wall Thickness | 3.5 mm |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.4 kg |
Type | Piston, air compressor |
Function | Piston, air compressor |
Outer diameter | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.53 kg |
Function | Engine Compartment Noise Insulation |
Type | Engine Compartment Noise Insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.366 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 70 mm |
Outer diameter | 136 mm |
Inner diameter | 32 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 112 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Replaces | 29447 |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (26474)
- 1x Febi Cap, wheel bearing (24232)
- 1x Febi Screw (26475)
Important compatibility info
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Weight | 0.815 kg |
for OE number | 1340758080 SK |
Material | Plastic |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Function | Sensor, oil pressure |
Screw length below head | 11 mm |
Spanner Size | 24 |
Weight | 0.054 kg |
Additional Information 2 | with seal ring |
Length | 49 mm |
External Thread Size | M16 x 1,5 |
Type | Sensor, oil pressure |
for OE number | 22899626 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 30 mm |
Number of Teeth | 112 |
Surface | Coated |
Belts | with trapezoidal tooth profile |
Function | Timing Belt |
Weight | 0.155 kg |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Hose Line, driver cab tilting device |
Internal Thread Size | M12 x 1,5, M12 x 1 |
External Thread Size | M14 x 1,5 |
Function | Hose Line, driver cab tilting device |
Outer diameter | 6.06 mm. 3.22 mm |
Length | 2122 mm |
Inner diameter | 2.11 mm. 1.95 mm |
Pressure | 362 bar |
Weight | 0.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper, Front |
Additional Information | with rubber-metal mounts |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 185552 |
Weight | 0.625 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.4 kg |
Length | 1263 mm |
Outer diameter | 7.52 mm |
Pressure | 400 bar |
Function | Hose Line, driver cab tilting device |
Internal Thread Size | M12 x 1,75 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023