Important compatibility info
Seal Material | Paper |
Material | Cast Aluminium |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Weight | 1.232 kg |
for OE number | 115 200 16 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.958 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Spark Plug (13462)
- 1x Febi Oil Filter (38813)
- 1x Febi Screw Plug, oil sump (21096)
- 1x Febi Filter, cabin air (17553)
- 1x Febi Air Filter (12765)
Important compatibility info
Outer diameter | 35 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Weight | 1.545 kg |
Placement on Vehicle | Front Axle |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.204 kg |
for OE number | 601 050 08 16 |
Function | Guide, timing chain |
Engine Management | Timing Chain |
Type | Guide, timing chain |
Placement on Vehicle | Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.242 kg |
Housing length | 281 mm |
Placement on Vehicle | both sides |
Length | 514 mm |
Eject Force | 490 N |
Stroke | 204 mm |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Mounting points diameter | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.49 kg |
Placement on Vehicle | Front Axle |
Material | Aluminium |
Inner diameter | 14 mm |
Function | Suspension Strut Support Mount |
Replaces | 100181 |
Type | Suspension Strut Support Mount |
Height | 47 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.069 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 1307 mm |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.903 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Seal kit, automatic adjustment |
Weight | 0.05 kg |
Function | Seal kit, automatic adjustment |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 141 mm |
Thickness | 38 mm |
Function | Cylinder Head, air compressor |
Weight | 0.895 kg |
Width | 130 mm |
Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 87 °C |
Weight | 0.194 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
for OE number | 111 200 03 15 |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left, Right |
Height | 140 mm |
Width | 140 mm |
Inspection Tag | ADR |
Light Function | with rear fog light (LED), with reverse light (LED), with taillight (LED), without number plate light |
Weight | 0.452 kg |
Shape/Form | round |
Mounting Type | Fully assembled |
Depth | 86 mm |
Voltage from | 12 V |
Voltage to | 24 V |
Type | Tail Light Assembly |
Fulfils ECE norm | R148, R10 |
Temperature range from | -40 °C |
Temperature range to | 65 °C |
Function | Tail Light Assembly |
Distance of fastening bolts | 45 mm |
Protection Type (IP Code) | IP6K9K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.58 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 40.5 mm |
Outer diameter | 85 mm |
Inner diameter | 45 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring |
Additional Information | with drive shaft bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Axle Bolt, drive shaft (26511)
- 1x Febi Screw (29748)
- 1x Febi Cover Plate, dust-cover wheel bearing (29769)
- 1x Febi Wheel Bearing Kit (29843)
Important compatibility info
Weight | 1.400 kg |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Right |
Type | Mounting, engine |
for OE number | 51757887 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.120 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 4. 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Length | 180 mm |
Thickness | 127 mm |
Additional Information 2 | with ball bearing |
Inner diameter | 54 mm |
Weight | 0.731 kg |
Bearing Type | Ball Bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Hole Spacing | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (170231)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
Weight | 0.155 kg |
Number of Connectors / Ports | 11 |
Combi Switch Function | with indicator function, with high beam function, with klaxon, with hazard warning light function |
Function | Steering Column Switch |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | LEM (Liquid Elastomer Molding) |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Weight | 0.04 kg |
Thickness | 0.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Outer diameter | 73 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.678 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Bore Diameter | 12 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.340 kg |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Max. Length | 365 mm |
Min. Length | 238 mm |
Pipe Diameter | 53 mm. 45 mm |
Piston conrod diameter | 12.5 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023