Important compatibility info
Weight | 0.97 kg |
Core Width | 176 mm |
Core Depth | 42 mm |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Core Length | 295 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Weight | 2.170 kg |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 25 |
External Teeth, Wheel Side | 42 |
Thread Size | M16x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, brake camshaft |
Type | Repair Kit, brake camshaft |
Weight | 0.332 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (19002)
- 2x Febi Shaft Seal, brake camshaft (19003)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (19004)
Important compatibility info
Mounting points diameter | 18 mm |
Placement on Vehicle | both sides |
Length | 522 mm |
Housing Diameter | 19 mm |
Weight | 0.2 kg |
Stroke | 154 mm |
Eject Force | 635 N |
Housing length | 303 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.37 kg |
Placement on Vehicle | Lower, Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 37470 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Weight | 0.5 kg |
Function | Door Seal |
Type | Door Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Operating Mode | Manual |
Paired article numbers | 14722 |
Function | Window Regulator |
Weight | 1.63 kg |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 107614 |
Weight | 0.048 kg |
Cable Length | 610 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from coolant regulator housing to engine cooler |
Weight | 0.438 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Placement on Vehicle | Lower |
Additional Information 2 | with clamps |
Inner diameter | 31 mm |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper, Front |
Additional Information | with rubber-metal mounts |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 185552 |
Weight | 0.625 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Slave Cylinder, clutch |
Weight | 0.200 kg |
Type | Slave Cylinder, clutch |
for OE number | 2182.05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 37471 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Lower, Front Axle Left |
Type | Control/Trailing Arm, wheel suspension |
Weight | 3.37 kg |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension, propshaft |
Weight | 0.430 kg |
Additional Information 2 | with rolling bearing |
Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (107322)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
Max. Length | 300 mm |
Min. Length | 240 mm |
Pipe Diameter | 43 mm. 34 mm |
Mounting points diameter | 14 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Piston conrod diameter | 12 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Weight | 1.27 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.371 kg |
Material | Metal |
Thickness | 1.2 mm |
Function | Gasket, cylinder head |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.625 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber-metal mounts |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 185550 |
Placement on Vehicle | Rear Axle Left, Upper, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 32 mm |
Weight | 0.195 kg |
Cooling Hose | from engine to thermostat |
Type | Radiator Hose |
Wall Thickness | 3.5 mm |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 955 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.040 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.152 kg |
Fill Medium | Brake Fluid |
Bore Diameter | 19 mm |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 158 mm |
Outer diameter | 106 mm |
External Teeth, Wheel Side | 30 |
Seal Diameter | 68 mm |
Internal Teeth, wheel side | 29 |
Weight | 3.780 kg |
Number of Teeth, ABS ring | 48 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023