Important compatibility info
Function | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Weight | 1.85 kg |
Type | Centre Rod Assembly |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.59 kg |
Material | Metal |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 42 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Weight | 0.880 kg |
Number of Teeth | 20 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information 2 | with seal ring |
Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.68 kg |
Additional Information | with nuts |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 28 mm |
Width | 133 mm |
Colour | Orange |
Rated Power | 18 W |
Cable Length | 1500 mm |
Voltage from | 9 V |
Number of circuits | 4 |
Voltage to | 30 V |
Protection Type (IP Code) | IP67 |
Fulfils ECE norm | R65, R10 |
Housing material | Aluminium |
Temperature range from | -40 °C |
Temperature range to | 65 °C |
Function | Strobe-type Beacon |
Weight | 0.180 kg |
Inspection Tag | EMC, SAE |
Light Design | LED |
Depth | 17 mm |
Type | Strobe-type Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Cable Length | 200 mm |
Number of circuits | 11 |
Type | Cable Repair Set, door |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Weight | 0.280 kg |
Type | Dust Cover Kit, shock absorber |
Length | 197 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (175930)
- 2x Febi Rubber Buffer, suspension (175933)
Important compatibility info
Cable Length | 570 mm |
Number of circuits | 8 |
Function | Cable Repair Set, boot lid |
Extra Description | febi Plus |
Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.92 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 99 mm |
Function | Suspension Spring |
Length | 336 mm |
Wire Diameter | 14 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 50 mm |
Length | 109 mm |
Function | Repair Kit, kingpin |
Weight | 1.722 kg |
Placement on Vehicle | Upper Front Axle, both sides |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05870)
- 1x Febi Bush, kingpin (05871)
- 1x Febi Seal Ring, steering knuckle (05872)
- 1x Febi Screw Plug, oil sump (05410)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Spacer, kingpin (05873)
- 1x Febi Circlip (04561)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 1018 mm |
Additional Information 2 | with crown nut |
Paired article numbers | 12940 |
Weight | 2.15 kg |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M18 x 1,5, M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Housing Type | with housing |
Additional Information | with temperature sensor |
Additional Information 2 | with seal ring |
Weight | 0.75 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.28 kg |
Placement on Vehicle | Rear Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 38256 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information | with fastening/mounting material |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23952)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (38253)
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 3.038 kg |
Internal Teeth, wheel side | 36 |
External Teeth, Wheel Side | 30 |
Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 432 mm |
Placement on Vehicle | Front Axle |
Weight | 2.49 kg |
Function | Suspension Spring |
Number of Coils | 10 |
Outer diameter | 131 mm |
Wire Diameter | 10.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 26 mm |
Outer diameter | 140 mm |
Inner diameter | 80 mm |
Bearing Type | Ball Bearing |
Function | Bearing, manual transmission |
Weight | 1.34 kg |
Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage from | 12 V |
Voltage to | 24 V |
Function | Tail Light Assembly |
Temperature range to | 65 °C |
Type | Tail Light Assembly |
Fulfils ECE norm | R148, R10 |
Temperature range from | -40 °C |
Placement on Vehicle | Left, Right |
Height | 140 mm |
Width | 140 mm |
Inspection Tag | D,ADR |
Light Function | with indicator (LED), with stop light (LED), with taillight (LED), without number plate light |
Weight | 0.452 kg |
Shape/Form | round |
Mounting Type | Fully assembled |
Depth | 86 mm |
Distance of fastening bolts | 45 mm |
Protection Type (IP Code) | IP6K9K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.51 kg |
Outer diameter | 90.175 mm |
Type | Piston, air compressor |
Function | Piston, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Cap, oil filter housing |
Type | Cap, oil filter housing |
Tightening Torque | 25 Nm |
Weight | 0.180 kg |
Outer diameter | 92.5 mm |
Height | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Radiator Hose |
Cooling Hose | from engine to engine cooler |
Function | Radiator Hose |
Additional Information | with quick coupling |
Weight | 0.406 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023