Important compatibility info
Function | Repair Kit, brake camshaft |
Type | Repair Kit, brake camshaft |
Weight | 0.332 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (19002)
- 2x Febi Shaft Seal, brake camshaft (19003)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (19004)
Important compatibility info
Weight | 0.6 kg |
Material | Aluminium |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 13 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 178865 |
Placement on Vehicle | Left Rear |
Length | 1838 mm |
Weight | 0.85 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 60 mm |
Material | Plastic |
Width of castor bearing surface | 26 mm |
Weight | 0.115 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 980 mm |
Weight | 0.051 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.166 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Inner diameter | 15 mm |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Height | 61 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 5.6 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 260 mm |
Thickness | 57 mm |
Brake Disc Thickness | 24 mm |
Minimum thickness | 22 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 58 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.55 kg |
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.903 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Weight | 0.054 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 680 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper |
Material | Cast Aluminium |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Weight | 1.232 kg |
for OE number | 115 200 16 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.204 kg |
for OE number | 601 050 08 16 |
Function | Guide, timing chain |
Engine Management | Timing Chain |
Type | Guide, timing chain |
Placement on Vehicle | Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Length | 180 mm |
Thickness | 127 mm |
Additional Information 2 | with ball bearing |
Inner diameter | 54 mm |
Weight | 0.731 kg |
Bearing Type | Ball Bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Hole Spacing | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (170231)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
Length | 75 mm |
Outer diameter | 39.8 mm. 46 mm |
Spanner Size | 19 |
Thread Length | 12 mm |
Number of Connectors / Ports | 2 |
Control Range | 0,25+0,15 bar |
Function | Sensor, oil pressure |
Switch point to | 5 bar |
for OE number | 001 542 56 17 |
Weight | 0.116 kg |
External Thread Size | M14 x 1,5 |
Type | Sensor, oil pressure |
Switch | with alarm switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.195 kg |
Width | 19.4 mm |
Outer diameter | 64 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 141 mm |
Thickness | 38 mm |
Function | Cylinder Head, air compressor |
Weight | 0.895 kg |
Width | 130 mm |
Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Weight | 0.050 kg |
Cable Length | 747 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.038 kg |
Number of Connectors / Ports | 2 |
Length | 615 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 178142 |
Weight | 1.33 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M24x1,5 |
Internal Teeth, wheel side | 37 |
External Teeth, Wheel Side | 30 |
Function | Joint Kit, drive shaft |
Weight | 2.982 kg |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023