Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Slave Cylinder, clutch |
| Weight | 0.200 kg |
| Type | Slave Cylinder, clutch |
| for OE number | 2182.05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 0.471 kg |
| Material | MVQ (silicone rubber) |
| Outer diameter | 94 mm |
| Inner diameter | 88 mm |
| Function | Charge Air Hose |
| Colour | Blue |
| Type | Charge Air Hose |
| Hose Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 37471 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Lower, Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 3.37 kg |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 0.625 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 185550 |
| Placement on Vehicle | Rear Axle Left, Upper, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| for OE number | 06J 906 051 F |
| Weight | 0.041 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 112 |
| Surface | Coated |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Weight | 0.155 kg |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 32 mm |
| Weight | 0.195 kg |
| Cooling Hose | from engine to thermostat |
| Type | Radiator Hose |
| Wall Thickness | 3.5 mm |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Width | 84 mm |
| Height | 51 mm |
| Length | 205 mm |
| Weight | 0.158 kg |
| Additional Information 2 | with oil sump gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 158 mm |
| Outer diameter | 106 mm |
| External Teeth, Wheel Side | 30 |
| Seal Diameter | 68 mm |
| Internal Teeth, wheel side | 29 |
| Weight | 3.780 kg |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.458 kg |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M24x1,5 |
| Internal Teeth, wheel side | 26 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 1.78 kg |
| Length | 125 mm |
| Width | 68 mm |
| Thickness | 126 mm |
| Thread Type | with left-hand thread |
| Cone Size | 27 mm |
| Function | Angled Ball Joint, steering push rod |
| External Thread Size | M30 x 1,5, M24 x 1,5 |
| Type | Angled Ball Joint, steering push rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
| Weight | 0.332 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (19002)
- 2x Febi Shaft Seal, brake camshaft (19003)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (19004)
£38.45
Important compatibility info
| Weight | 0.152 kg |
| Fill Medium | Brake Fluid |
| Bore Diameter | 19 mm |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Weight | 1.09 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 46338675 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 1.05 kg |
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (07479)
- 2x Febi Holder, brake camshaft seal ring (07480)
- 2x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Shaft Seal, brake camshaft (07494)
- 1x Febi Stop Plate, adjuster (07483)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07495)
- 1x Febi Spacer, brake shaft (07486)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07491)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01094)
£38.45
Important compatibility info
| Pipe Diameter | 64.5 mm. 42.5 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 337 mm |
| Min. Length | 228 mm |
| Weight | 1.924 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Left Front, Right Front |
| Operating Mode | Mechanical |
| Type | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 522 mm |
| Housing Diameter | 19 mm |
| Weight | 0.2 kg |
| Stroke | 154 mm |
| Eject Force | 635 N |
| Housing length | 303 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Spanner Size | 49 |
| Additional Information | with counter nut |
| External Thread Size | M22 x 1,5 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Weight | 1.535 kg |
| Length | 207 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 0.371 kg |
| Material | Metal |
| Thickness | 1.2 mm |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Width of castor bearing surface | 21 mm |
| Outer diameter | 73 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 0.836 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023