Proud to be a UK-based company
Contact us
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.081 kg |
| Cable Length | 350 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Width | 223 mm |
| Material | ACM (Polyacrylate) |
| Thickness | 8 mm |
| Weight | 0.214 kg |
| Mounting points diameter | 12 mm. 10.6 mm. 24.7 mm |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Length | 436 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 1.36 kg |
| Function | Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with nut, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (33512)
- 1x Febi Bellow Kit, steering (43550)
£37.46
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Cable Length | 200 mm |
| Number of circuits | 11 |
| Type | Cable Repair Set, door |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Type | Gasket Set, cylinder head cover |
| Weight | 0.14 kg |
| Material | MVQ (silicone rubber) |
| Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 0.440 kg |
| Material | Aluminium |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (26319)
- 1x Febi Bearing, propshaft centre bearing (05362)
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.950 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 530 mm |
| Min. Length | 353 mm |
| Pipe Diameter | 48.5 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 2.98 kg |
| Material | Rubber/Metal |
| Outer diameter | 155 mm |
| Inner diameter | 31.5 mm |
| Function | Bushing, axle cross member |
| Placement on Vehicle | Front Axle |
| Width | 114 mm. 90 mm |
| Type | Bushing, axle cross member |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 29 |
| Type | Joint Kit, drive shaft |
| Weight | 3.180 kg |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 36 |
| Length | 174 mm |
| Function | Joint Kit, drive shaft |
| Outer diameter | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 38255 |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Weight | 2.28 kg |
| Placement on Vehicle | Rear Axle Right |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23953)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (38253)
£37.46
Important compatibility info
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 27 |
| Weight | 2.646 kg |
| Type | Joint Kit, drive shaft |
| Thread Size | M24 x 2,0 |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| External Teeth, Wheel Side | 31 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 0.51 kg |
| Outer diameter | 90.175 mm |
| Type | Piston, air compressor |
| Function | Piston, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1018 mm |
| Additional Information 2 | with crown nut |
| Paired article numbers | 12940 |
| Weight | 2.15 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M18 x 1,5, M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 0.41 kg |
| Placement on Vehicle | Left Front |
| Paired article numbers | 08876 |
| Function | Door Seal |
| Type | Door Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Housing Type | with housing |
| Additional Information | with temperature sensor |
| Additional Information 2 | with seal ring |
| Weight | 0.75 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 0.908 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21183 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M10 x 1 |
| Length | 96.8 mm |
| Voltage | 4.4 V |
| Spanner Size | 10 |
| Fitting Depth | 24 mm |
| Weight | 0.03 kg |
| Glow Plug Type | Metal glow plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.45
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178152 |
| Weight | 1.5 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.45
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178151 |
| Weight | 1.5 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.45
Important compatibility info
| Function | Mounting, engine |
| Weight | 1.702 kg |
| Placement on Vehicle | Lower |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023