Important compatibility info
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Placement on Vehicle | Rear Axle |
Weight | 0.230 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187823)
- 2x Febi Protective Cap/Bellow, shock absorber (188520)
Important compatibility info
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
Weight | 0.059 kg |
Paired article numbers | 176059 |
Placement on Vehicle | Right |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.984 kg |
Material | Plastic |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Replaces | 27105 |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.051 kg |
Outer diameter | 30.3 mm |
Opening Temperature | 88 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 53 mm |
Material | Plastic |
Outer diameter | 69 mm |
Weight | 0.445 kg |
Mounting points diameter | 10 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M6 x 1 |
Function | Door Lock |
Type | Door Lock |
Weight | 0.4 kg |
Paired article numbers | 177319 |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 597 mm |
Weight | 0.2 kg |
Housing Diameter | 25 mm |
Eject Force | 385 N |
Stroke | 224 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 340 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Operating Mode | Electric |
Paired article numbers | 193249 |
Weight | 0.9 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Placement on Vehicle | both sides |
Length | 462 mm |
Housing Diameter | 19 mm |
Eject Force | 650 N |
Stroke | 142 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 285.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Material | Cast Steel |
Steering arm type | Control Arm |
Weight | 1.853 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Inner diameter | 138 mm |
Filter type | Filter Insert |
Height | 333 mm |
Weight | 1.895 kg |
Outer diameter | 245 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.25 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 46 mm |
Outer diameter | 88 mm |
Inner diameter | 49 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
for OE number | 210 980 05 16 |
Additional Information | with fastening/mounting material |
Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Bolt, brake caliper (05792)
- 1x Febi Bolt, brake disc (05560)
- 1x Febi Nut, kingpin (01841)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (08208)
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M24x1,5 |
Internal Teeth, wheel side | 37 |
External Teeth, Wheel Side | 30 |
Function | Joint Kit, drive shaft |
Weight | 2.982 kg |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
External Thread Size | M18 x 1,5 |
Weight | 1.9 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 275 mm |
Rod/Strut | Coupling Rod |
Cone Size | 22 mm |
Pipe Diameter | 30 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Weight | 4.515 kg |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Inner diameter | 70 mm |
Outer diameter | 150 mm |
Width | 54 mm |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Number of Teeth | 24 |
Seal Material | Paper |
Water pump impeller material | Metal |
Weight | 0.950 kg |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.92 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 99 mm |
Function | Suspension Spring |
Length | 336 mm |
Wire Diameter | 14 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 40 mm |
Outer diameter | 63 mm |
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Weight | 0.514 kg |
Number of Ribs | 6 |
Additional Information 2 | with lid |
Inner diameter | 17 mm |
Placement on Vehicle | engine sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
DIN / ISO | 3731 - Typ S |
Working length | 3.5 m |
Number of Connectors / Ports | 7 |
Voltage | 24 V |
Material | PU (Polyurethane) |
Weight | 0.790 kg |
Connecting plug material | Metal |
Function | Coiled Cable |
Type | Coiled Cable |
Additional Information 2 | with plug |
Version | Aftermarket |
Temperature range from | -40 °C |
Temperature range to | 85 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Bore Diameter | 12 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Suspension Strut |
Weight | 3.860 kg |
Shock Absorber Mounting Type | Top pin, Bottom Clamp |
Mounting bores distance | 58 mm |
Max. Length | 530 mm |
Min. Length | 353 mm |
Pipe Diameter | 48.5 mm |
Piston conrod diameter | 22 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023