Important compatibility info
Weight | 1.25 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 46 mm |
Outer diameter | 88 mm |
Inner diameter | 49 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
for OE number | 210 980 05 16 |
Additional Information | with fastening/mounting material |
Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Bolt, brake caliper (05792)
- 1x Febi Bolt, brake disc (05560)
- 1x Febi Nut, kingpin (01841)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (08208)
Important compatibility info
for OE number | 3093100 |
Function | Repair Kit, clutch slave cylinder |
Weight | 0.134 kg |
Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Outer diameter | 65 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 1.04 kg |
Width of castor bearing surface | 32 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Placement on Vehicle | Left Front |
Operating Mode | Manual |
Paired article numbers | 171974 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Inner diameter | 138 mm |
Filter type | Filter Insert |
Height | 333 mm |
Weight | 1.895 kg |
Outer diameter | 245 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.41 kg |
Placement on Vehicle | Left Front |
Paired article numbers | 08876 |
Function | Door Seal |
Type | Door Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Weight | 0.039 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 520 mm |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Placement on Vehicle | Rear Axle |
Weight | 0.230 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187823)
- 2x Febi Protective Cap/Bellow, shock absorber (188520)
Important compatibility info
Type | Washer Fluid Pump, window cleaning |
Pump Type | Dual Pump |
Function | Washer Fluid Pump, window cleaning |
Weight | 0.15 kg |
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 380 mm |
Number of Coils | 7 |
Outer diameter | 116 mm |
Wire Diameter | 12.8 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Weight | 2.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.434 kg |
Steering arm type | Control Arm |
Material | Steel |
Placement on Vehicle | Rear Axle Right, Upper |
Paired article numbers | 175086 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.434 kg |
Placement on Vehicle | Rear Axle Left, Upper |
Paired article numbers | 175087 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.92 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 99 mm |
Function | Suspension Spring |
Length | 336 mm |
Wire Diameter | 14 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Weight | 1.85 kg |
Type | Centre Rod Assembly |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Worklight |
Lumen | 2600 lm |
Voltage from | 9 V |
Depth | 63 mm |
Mounting Type | Fully assembled |
Light Design | LED |
Weight | 0.497 kg |
Rated Power | 24 W |
Light Distribution | Long-range illumination |
Plug Type | DEUTSCH plug |
Voltage to | 32 V |
Protection Type (IP Code) | IP6K9K |
Type | Worklight |
Fulfils ECE norm | R10, R148 |
Height | 123 mm |
Width | 143 mm |
Inspection Tag | EMC, ADR, Cispr 25 Class 3 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.69 kg |
Placement on Vehicle | Rear Axle |
Length | 347 mm |
Outer diameter | 118 mm |
Number of Coils | 7.8 |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Material | Cast Steel |
Steering arm type | Control Arm |
Weight | 1.853 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Bore Diameter | 12 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Suspension Strut |
Weight | 3.860 kg |
Shock Absorber Mounting Type | Top pin, Bottom Clamp |
Mounting bores distance | 58 mm |
Max. Length | 530 mm |
Min. Length | 353 mm |
Pipe Diameter | 48.5 mm |
Piston conrod diameter | 22 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.252 kg |
Internal Teeth, wheel side | 24 |
External Teeth, Wheel Side | 29 |
Thread Size | M24x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Weight | 4.515 kg |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Inner diameter | 70 mm |
Outer diameter | 150 mm |
Width | 54 mm |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023