Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.06 kg |
| Opening Temperature | 79 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.69 kg |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.781 kg |
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106633 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1610 mm |
| Function | Sensor, wheel speed |
| Weight | 0.070 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 102 mm |
| Width | 90 mm |
| Material | Rubber/Metal |
| Outer diameter | 90 mm |
| Thickness | 90 mm |
| Inner diameter | 33 mm |
| Function | Mounting, stabiliser bar |
| Weight | 1.469 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Material | Rubber/Metal, Plastic |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.83 kg |
| Type | Mounting, engine |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Outer diameter | 39 mm |
| Weight | 1.432 kg |
| Bolt Hole Circle Diameter | 110 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | with wheel studs, without wheel bearing |
| Inner diameter | 29 mm |
| Width | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.25 kg |
| Outer diameter | 70 mm |
| Function | Tensioner Pulley, timing belt |
| Material | Plastic |
| Width | 32 mm |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Hole Spacing | 38 mm |
| Weight | 0.039 kg |
| Length | 52.3 mm |
| Width | 57 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.16 kg |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | MN195805 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.764 kg |
| Outer Length | 1030 mm |
| Inner Length | 623 mm |
| Type | Cable Pull, clutch control |
| Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Weight | 2.160 kg |
| Int. teeth, diff.side, conn.to transm. | 34 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.771 kg |
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 045 121 011 BX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 0.342 kg |
| Width of castor bearing surface | 34 mm |
| Material | Metal |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 60 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Weight | 1.55 kg |
| Outer diameter | 150 mm |
| Thickness | 42.02 mm |
| Inner diameter | 28 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Colour Coding | White |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.43
Important compatibility info
| Weight | 0.059 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 106480 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1870 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.43
Important compatibility info
| Length | 140 mm |
| Outer diameter | 108 mm |
| Inner diameter | 19 mm. 26 mm |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Rear Axle Left, Front, Rear, Rear Axle Right |
| Weight | 1.894 kg |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
| Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.43
Important compatibility info
| Width | 34.7 mm |
| Outer diameter | 53.7 mm |
| Additional Information 2 | with lid |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Weight | 0.448 kg |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.43
Important compatibility info
| Weight | 0.490 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | FPM (fluoride rubber) |
| Outer diameter | 175 mm. 205 mm |
| Thickness | 16.3 mm |
| Inner diameter | 139 mm |
| Number of Teeth | 100 |
| Type | Shaft Seal, wheel hub |
| Function | Shaft Seal, wheel hub |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.43
Important compatibility info
| Engine Management | Timing Chain |
| Type | Gear, intermediate shaft |
| Function | Gear, intermediate shaft |
| Number of Teeth | 36. 22 |
| Weight | 0.374 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.42
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023