Proud to be a UK-based company
Contact us
Important compatibility info
| Seal Diameter | 50 mm |
| Internal Teeth, wheel side | 23 |
| Weight | 2.170 kg |
| Number of Teeth, ABS ring | 44 |
| External Thread Size | M22 x 1,5 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 25 |
| Outer diameter | 87 mm |
| Length | 158 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| for OE number | 3093100 |
| Function | Repair Kit, clutch slave cylinder |
| Weight | 0.134 kg |
| Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.252 kg |
| Internal Teeth, wheel side | 24 |
| External Teeth, Wheel Side | 29 |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.720 kg |
| for OE number | 2N0 412 303 J S1 |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187820)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
£36.47
Important compatibility info
| Internal Thread Size | M6 x 1 |
| Function | Door Lock |
| Type | Door Lock |
| Weight | 0.4 kg |
| Paired article numbers | 177320 |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.944 kg |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, Front |
| Additional Information | with fastening/mounting material |
| External Thread Size | M12 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (179415)
- 2x Febi Screw (21477)
- 2x Febi Washer (40408)
- 2x Febi Nut (34653)
£36.47
Important compatibility info
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 35 |
| Internal Teeth, wheel side | 29 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Thread Size | M33x1,5 |
| Type | Joint Kit, drive shaft |
| Weight | 4.042 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Air Filter |
| Inner diameter | 138 mm |
| Filter type | Filter Insert |
| Height | 333 mm |
| Weight | 1.895 kg |
| Outer diameter | 245 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Control Type | Rotary Operation |
| Weight | 0.169 kg |
| Material | Plastic |
| Outer diameter | 57.5 mm |
| Number of Connectors / Ports | 13 |
| Function | Switch, headlight |
| Extra Description | febi Plus |
| Type | Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.542 kg |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (179915)
- 2x Febi Protective Cap/Bellow, shock absorber (181758)
£36.47
Important compatibility info
| Placement on Vehicle | Rear, Rear Axle Left, Upper, Rear Axle Right |
| Weight | 0.594 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Bore Diameter | 30 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.620 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 606 mm |
| Min. Length | 370 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 15.5 mm |
| Weight | 3.02 kg |
| Outer diameter | 132 mm |
| Length | 300 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Sensor Ring, ABS |
| Placement on Vehicle | Front Axle |
| Material | Steel |
| Outer diameter | 210 mm |
| Inner diameter | 186 mm |
| Weight | 0.720 kg |
| Type | Sensor Ring, ABS |
| Number of Teeth, ABS ring | 100 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.25 kg |
| Function | Gas Spring, bonnet |
| Housing length | 432 mm |
| Placement on Vehicle | Right |
| Length | 811 mm |
| Housing Diameter | 26 mm |
| Eject Force | 390 N |
| Stroke | 176 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 380 mm |
| Number of Coils | 7 |
| Outer diameter | 116 mm |
| Wire Diameter | 12.8 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Weight | 2.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Mounting points diameter | 16.5 mm |
| Housing length | 260 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 6 mm |
| Stroke | 207 mm |
| Eject Force | 40 N |
| Housing Diameter | 13 mm |
| Length | 489 mm |
| Placement on Vehicle | Left Rear |
| Weight | 0.204 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.45
Important compatibility info
| Weight | 0.88 kg |
| Placement on Vehicle | Right Front |
| Operating Mode | Manual |
| Paired article numbers | 104916 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.45
Important compatibility info
| Height | 447 mm |
| Outer diameter | 254 mm |
| Function | Air Filter |
| Inner diameter | 126 mm |
| Filter type | Filter Insert |
| Weight | 0.62 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.45
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 42 mm |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 185992 |
| Weight | 2.2 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023