Important compatibility info
Weight | 1.28 kg |
Placement on Vehicle | Rear, Lower |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Weight | 0.42 kg |
Width of castor bearing surface | 32 mm |
Outer diameter | 90 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with top, with screw |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Rear |
Weight | 0.300 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.708 kg |
Placement on Vehicle | Left |
Material | Rubber/Metal |
Paired article numbers | 08783 |
Bearing/Mounting Type | Hydro Mount |
Replaces | 12338 |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 146.5 mm |
Weight | 0.34 kg |
Function | Cap, oil filter housing |
Type | Cap, oil filter housing |
Length | 263 mm |
Tightening Torque | 30 Nm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.66 kg |
Wear Warning Contact | prepared for wear warning indicator |
Placement on Vehicle | Front Axle |
Length | 153.7 mm |
Width | 92.5 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 269 mm |
Surface | Coated |
Weight | 4.57 kg |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Solid |
Number of mounting bores | 3 |
Minimum thickness | 9 mm |
Placement on Vehicle | Rear Axle |
Centering Diameter | 55 mm |
Bolt Hole Circle Diameter | 100 mm |
Thickness | 66 mm |
Brake Disc Thickness | 10.2 mm |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Light Design | Halogen |
Placement on Vehicle | Right Exterior Mirror |
Paired article numbers | 198584 |
Colour | Orange |
Weight | 0.06 kg |
Power Consumption | 16 W |
Type | Auxiliary Direction Indicator |
Function | Auxiliary Direction Indicator |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Glow Plug Type | after-glow capable |
Type | Glow Plug |
Weight | 0.04 kg |
Length | 134 mm |
Voltage | 11 V |
Spanner Size | 10 |
Function | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 172545 |
Number of Connectors / Ports | 2 |
Cable Length | 1045 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.065 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Width | 41 mm |
Outer diameter | 125 mm |
Inner diameter | 70 mm |
Type | Wheel Bearing |
Weight | 2.13 kg |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 39 mm |
Weight | 1.432 kg |
Bolt Hole Circle Diameter | 110 mm |
Placement on Vehicle | Front Axle |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | with wheel studs, without wheel bearing |
Inner diameter | 29 mm |
Width | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.57 kg |
Inner diameter 2 | 45 mm |
Function | Wheel Bearing Kit |
Outer diameter 2 | 85 mm |
Bearing Type | Angular Ball Bearing |
Outer diameter 1 | 82 mm |
Inner diameter 1 | 43 mm |
Width | 40 mm |
Type | Wheel Bearing Kit |
Additional Information | with drive shaft bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (26376)
- 1x Febi Screw (29748)
- 4x Febi Axle Bolt, drive shaft (26511)
- 1x Febi Cover Plate, dust-cover wheel bearing (29769)
Important compatibility info
Additional Information | with gasket/seal, with temperature sensor |
Weight | 0.16 kg |
Opening Temperature | 90 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Weight | 1.400 kg |
Type | Mounting, manual transmission |
Function | Mounting, manual transmission |
External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Function | Intake Hose, air filter |
Material | Plastic |
Weight | 0.171 kg |
Extra Description | febi Plus |
Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 40 mm |
Outer diameter 1 | 82 mm |
Weight | 1.58 kg |
Inner diameter 2 | 45 mm |
Additional Information 2 | with bolts/screws |
Inner diameter 1 | 43 mm |
Function | Wheel Bearing Kit |
Sealing lip material | HNBR (hydrogenated nitrile butadiene rubber) |
Type | Wheel Bearing Kit |
Outer diameter 2 | 85 mm |
Bearing Type | Angular Ball Bearing |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (26376)
- 4x Febi Axle Bolt, drive shaft (46525)
- 1x Febi Cover Plate, dust-cover wheel bearing (29769)
- 1x Febi Screw (29748)
Important compatibility info
Paired article numbers | 32083 |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.07 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 12 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.871 kg |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, air suspension |
Outer diameter | 230 mm. 197 mm |
Thickness | 435 mm |
Weight | 1.8 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Bellow, air suspension |
Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023