Important compatibility info
Placement on Vehicle | Front Axle |
Length | 137 mm |
Width | 57.4 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.720 kg |
Type | Brake Pad Set, disc brake |
Number of wear indicators | 1 Per Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.64 kg |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 8A0 121 403 |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 87 °C |
Weight | 0.20 kg |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.456 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Replaces | 07854 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Height | 48 mm |
Outer diameter | 456 mm |
Weight | 0.88 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Inner diameter | 224 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Weight | 0.528 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Wiper Arm, window cleaning |
Weight | 0.429 kg |
Paired article numbers | 180301 |
Additional Information 2 | with integrated washer fluid jet |
Material | Steel |
Length | 561 mm |
Placement on Vehicle | Front, Left |
Extra Description | febi Plus |
Function | Wiper Arm, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 290 mm |
Outer diameter | 89.5 mm |
Weight | 2.0 kg |
Type | Spring, driver cab suspension |
Function | Spring, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Additional Information | with rubber-metal mounts |
Material | Steel |
Steering arm type | Control Arm |
Weight | 1.707 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.420 kg |
Length | 395 mm |
Height | 155 mm |
Width | 155 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Weight | 0.284 kg |
Additional Information | with gasket/seal |
Opening Temperature | 92 °C |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.075 kg |
Type | Repair Kit, clutch booster |
Function | Repair Kit, clutch booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 57 mm |
Weight | 0.351 kg |
Joint Type | CV Joint |
Type | Bellow Kit, drive shaft |
Material | Thermoplastic polyester elastomer |
Placement on Vehicle | Rear Axle, Wheel Side |
Length | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180069)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Paired article numbers | 193111 |
Mounting points diameter | 13 mm |
Placement on Vehicle | Front Axle Left |
Piston conrod diameter | 22 mm |
Max. Length | 518 mm |
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Shock Absorber System | Twin-Tube |
Weight | 3.620 kg |
Min. Length | 339 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Shock Absorber Type | Gas Pressure |
External Thread Size | M12 x 1,25 |
Pipe Diameter | 51 mm |
Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 0.848 kg |
Placement on Vehicle | Upper, outer, Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 100.7 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Material | Rubber/Metal |
Placement on Vehicle | Lower, Front Axle Left, Front, Front Axle Right |
Weight | 1.268 kg |
Inner diameter | 16.8 mm |
Thickness | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
Extra Description | febi Plus |
Colour | Black |
Number of Connectors / Ports | 2 |
Cable Length | 157 mm |
Function | Sensor, engine oil level |
Type | Sensor, engine oil level |
Additional Information 2 | with seal ring |
Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
ABS Ring Diameter | 104 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 48 |
Weight | 2.858 kg |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
External Teeth, Wheel Side | 38 |
Internal Teeth, wheel side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Separator, crankcase ventilation |
Colour | Black |
Material | Plastic |
Weight | 0.156 kg |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
for OE number | 11 61 7 526 654 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.23 kg |
Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
Width | 27 mm |
Outer diameter | 125 mm |
Inner diameter | 70 mm |
Bearing Type | Cylindrical Roller Bearing |
Type | Wheel Bearing |
Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023