Important compatibility info
Weight | 0.25 kg |
Outer diameter | 70 mm |
Function | Tensioner Pulley, timing belt |
Material | Plastic |
Width | 32 mm |
Type | Tensioner Pulley, timing belt |
Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 12 mm |
Function | Suspension Strut Support Mount |
Material | Aluminium |
Outer diameter | 95 mm |
Placement on Vehicle | Rear Axle |
Weight | 0.53 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.120 kg |
Material | Metal |
Thickness | 0.4 mm |
Type | Gasket, cylinder head |
Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 146.5 mm |
Weight | 0.34 kg |
Function | Cap, oil filter housing |
Type | Cap, oil filter housing |
Length | 263 mm |
Tightening Torque | 30 Nm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Slave Cylinder, clutch |
Weight | 0.554 kg |
Type | Slave Cylinder, clutch |
for OE number | 002 295 13 07 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.6 kg |
Placement on Vehicle | Front Axle |
Length | 362 mm |
Outer diameter | 140 mm |
Function | Suspension Spring |
Wire Diameter | 12.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.66 kg |
Wear Warning Contact | prepared for wear warning indicator |
Placement on Vehicle | Front Axle |
Length | 153.7 mm |
Width | 92.5 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 14 mm |
Weight | 2.53 kg |
Placement on Vehicle | Front Axle |
Length | 351 mm |
Outer diameter | 160 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 269 mm |
Surface | Coated |
Weight | 4.57 kg |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Solid |
Number of mounting bores | 3 |
Minimum thickness | 9 mm |
Placement on Vehicle | Rear Axle |
Centering Diameter | 55 mm |
Bolt Hole Circle Diameter | 100 mm |
Thickness | 66 mm |
Brake Disc Thickness | 10.2 mm |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.142 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Steering | with tie rod end |
Function | Tie Rod |
Additional Information | with fastening/mounting material |
External Thread Size | M16 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37331)
- 1x Febi Inner Tie Rod (30654)
- 1x Febi Screw (37329)
Important compatibility info
Weight | 1.170 kg |
Placement on Vehicle | Front Axle |
Length | 128 mm |
Width | 61 mm |
Material | Rubber/Metal |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.032 kg |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M14 x 2 |
Placement on Vehicle | outer, Front Axle Left |
Length | 188 mm |
Thickness | 79 mm |
Paired article numbers | 48112 |
Type | Tie Rod End |
Function | Tie Rod End |
Extra Description | ProKit |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 40 mm |
Outer diameter 1 | 82 mm |
Weight | 1.58 kg |
Inner diameter 2 | 45 mm |
Additional Information 2 | with bolts/screws |
Inner diameter 1 | 43 mm |
Function | Wheel Bearing Kit |
Sealing lip material | HNBR (hydrogenated nitrile butadiene rubber) |
Type | Wheel Bearing Kit |
Outer diameter 2 | 85 mm |
Bearing Type | Angular Ball Bearing |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (26376)
- 4x Febi Axle Bolt, drive shaft (46525)
- 1x Febi Cover Plate, dust-cover wheel bearing (29769)
- 1x Febi Screw (29748)
Important compatibility info
Weight | 1.57 kg |
Inner diameter 2 | 45 mm |
Function | Wheel Bearing Kit |
Outer diameter 2 | 85 mm |
Bearing Type | Angular Ball Bearing |
Outer diameter 1 | 82 mm |
Inner diameter 1 | 43 mm |
Width | 40 mm |
Type | Wheel Bearing Kit |
Additional Information | with drive shaft bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (26376)
- 1x Febi Screw (29748)
- 4x Febi Axle Bolt, drive shaft (26511)
- 1x Febi Cover Plate, dust-cover wheel bearing (29769)
Important compatibility info
Placement on Vehicle | Rear, both sides |
Cable Length | 200 mm |
Number of circuits | 11 |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 33 50 6 882 820 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Additional Information 2 | without ball bearing |
Weight | 0.558 kg |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Glow Plug |
External Thread Size | M18 x 1,5 |
Length | 78.5 mm |
Type | Glow Plug |
Glow Plug Type | after-glow capable |
Voltage | 9 V |
Spanner Size | 21 |
Weight | 0.07 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 32083 |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.07 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Tailgate Lock |
for OE number | 1T0 827 505 J 9B9 |
Weight | 0.397 kg |
Additional Information | with adjuster |
Type | Tailgate Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 12 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.871 kg |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023