Important compatibility info
Weight | 0.354 kg |
Type | Clutch Release Bearing |
Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dryer, air conditioning |
Type | Dryer, air conditioning |
Weight | 0.764 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.213 kg |
Operating Mode | Mechanical |
Spanner Size | 32 |
Opening Pressure | 6.2 bar |
Type | Overflow Valve |
Function | Overflow Valve |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.78 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Inner diameter 2 | 32.19 mm |
Inner diameter 1 | 19.08 mm |
Function | Connecting Rod, air compressor |
Type | Connecting Rod, air compressor |
Hole Spacing | 92.46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.099 kg |
Function | Tie Rod |
Paired article numbers | 49065 |
Length | 370 mm |
Placement on Vehicle | Front Axle Left |
Extra Description | ProKit |
Internal Thread Size | M16 x 1,5 |
Type | Tie Rod |
External Thread Size | M12 x 1,5 |
Additional Information 2 | with clamps, with steering bellow |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (19336)
- 1x Febi Inner Tie Rod (32597)
- 1x Febi Bellow, steering (39602)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38754)
Important compatibility info
Weight | 1.3 kg |
Outer diameter | 116 mm |
Thickness | 70 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 98 mm |
Outer diameter 1 | 42 mm |
Outer diameter 2 | 59 mm |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.043 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 605 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.21 kg |
Opening Temperature | 80 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 0.848 kg |
Placement on Vehicle | Upper, outer, Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 81.32411.0007 |
Function | Release Fork, clutch |
Weight | 1.846 kg |
Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Weight | 1.099 kg |
Additional Information | with nuts |
Placement on Vehicle | Front Axle Right |
Length | 333 mm |
Paired article numbers | 49063 |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (39602)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38754)
- 1x Febi Tie Rod End (19342)
- 1x Febi Inner Tie Rod (32597)
Important compatibility info
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Min. Length | 339 mm |
Weight | 3.580 kg |
External Thread Size | M12 x 1,25 |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Pipe Diameter | 51 mm |
Piston conrod diameter | 22 mm |
Function | Shock Absorber |
Shock Absorber Design | Suspension Strut |
Max. Length | 518 mm |
Paired article numbers | 193112 |
Placement on Vehicle | Front Axle Right |
Mounting points diameter | 13 mm |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Placement on Vehicle | Left, Right |
Material | Plastic |
Colour | Black |
Type | Exterior Door Handle |
Function | Exterior Door Handle |
Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.0 kg |
Inner diameter | 233.5 mm |
Outer diameter | 446 mm |
Placement on Vehicle | Rear Axle |
Height | 66 mm |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.266 kg |
Material | Metal |
Outer diameter | 80 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 57 mm |
Weight | 0.351 kg |
Joint Type | CV Joint |
Type | Bellow Kit, drive shaft |
Material | Thermoplastic polyester elastomer |
Placement on Vehicle | Rear Axle, Wheel Side |
Length | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180069)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Paired article numbers | 193111 |
Mounting points diameter | 13 mm |
Placement on Vehicle | Front Axle Left |
Piston conrod diameter | 22 mm |
Max. Length | 518 mm |
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Shock Absorber System | Twin-Tube |
Weight | 3.620 kg |
Min. Length | 339 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Shock Absorber Type | Gas Pressure |
External Thread Size | M12 x 1,25 |
Pipe Diameter | 51 mm |
Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.190 kg |
Function | Release Fork, clutch |
Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 1x Febi Thrust Roller, release fork (35529)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
- 1x Febi Release Fork, clutch (44433)
Important compatibility info
Placement on Vehicle | Front |
Type | Wiper Motor |
Weight | 1.05 kg |
Rated Power | 30 W |
Driver Position | for left-hand drive vehicles |
Function | Wiper Motor |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023