Important compatibility info
Outer diameter | 90 mm |
Height | 120 mm |
Filter type | with water sensor |
Function | Fuel filter |
Type | Fuel filter |
Important compatibility info
Important compatibility info
Type | Cable Pull, parking brake |
Length 1 | 1365 mm |
Function | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
Length | 1210 mm |
Function | Cable Pull, clutch control |
Type | Cable Pull, clutch control |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR4787 |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR4788 |
Important compatibility info
Length 1 | 1693 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
Additional Information 2 | without banjo bolt |
Length | 469 mm |
Function | Brake Hose |
Type | Brake Hose |
Additional Information | with banjo fitting |
Thread Type | with internal thread |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Thread Measurement 2 | M17X1.5 |
Length | 308 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 308 mm |
Axle Joint Thread Type | with right-hand thread, with external thread |
Type | Inner Tie Rod |
Important compatibility info
Thread Measurement 2 | M14X1.5 |
Length | 305 mm |
Function | Inner Tie Rod |
Thread Measurement 1 | M16X1.0 |
Axle Joint Length | 305 mm |
Axle Joint Thread Type | with external thread |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Additional Information | with banjo fitting |
Thread Size | M10x1 |
Thread Type | with internal thread |
Function | Brake Hose |
Length | 613 mm |
Type | Brake Hose |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with banjo bolt |
Mounting Bolt Thread Size | M10x1 |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 125 mm |
Inner diameter 2 | 86 mm |
Inner diameter 1 | 25 mm |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Material | Polychloroprene (Neoprene) |
Lubrication | with grease lubrication |
Important compatibility info
Thread Size | M10X1.25 |
Length | 70 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Thread Measurement 1 | M10x1 |
Thread Measurement 2 | M16x1.5 |
Length | 367 mm |
Function | Brake Hose |
Thread Size | M10x1 |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |
Important compatibility info
Length | 437 mm |
Function | Brake Hose |
Thread Measurement 1 | M10x1 |
Thread Measurement 2 | M10x1 |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Measurement 2 | M12X1.25 |
Thread Size | M12X1.25 |
Length | 241 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Thread Measurement 1 | M12x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Important compatibility info
Inner diameter | 14.1 mm |
Diameter | 43 mm |
Length | 73.5 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6988 |
Placement on Vehicle | Front Axle, Left, Right, Lower |
Important compatibility info
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Inner diameter 2 | 69 mm |
Inner diameter 1 | 23 mm |
Function | Bellow Kit, drive shaft |
Length | 97 mm |
Additional Information 2 | with clamps |
Important compatibility info
Diameter | 88 mm |
Pressure | 2 bar |
Material | Plastic |
Pressure to | 29 psi |
Function | Cap, coolant tank |
Type | Cap, coolant tank |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023