Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.2 kg |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 327 mm |
| Outer diameter | 166 mm |
| Type | Suspension Spring |
| Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.48
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Weight | 0.210 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 60 mm |
| Material | Plastic |
| Mounting points diameter | 10 mm |
| Inner diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with top |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.47
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.080 kg |
| Paired article numbers | 178005 |
| Function | Sensor, wheel speed |
| Cable Length | 735 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.46
Important compatibility info
| Weight | 0.161 kg |
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | MN195616 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.15 kg |
| Number of Connectors / Ports | 12 |
| Combi Switch Function | with wipe-wash function, with light dimmer function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 1.622 kg |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 49 mm |
| Outer diameter | 88 mm |
| Width | 46 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring, with bolts/screws |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (01841)
- 6x Febi Screw (21661)
- 1x Febi Circlip (08208)
- 1x Febi Bolt, brake disc (21663)
£34.45
Important compatibility info
| Placement on Vehicle | Right Rear, Left Rear |
| Length | 1779 mm |
| Weight | 0.505 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.395 kg |
| Outer diameter | 93 mm |
| Thickness | 63 mm |
| Inner diameter | 10 mm |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Function | Joint Kit, drive shaft |
| Weight | 1.850 kg |
| Internal Teeth, wheel side | 27 |
| External Teeth, Wheel Side | 26 |
| Thread Size | M22x1,5 |
| Placement on Vehicle | Front Axle Right, Wheel Side |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.11 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 915 mm |
| Colour | Grey |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.081 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Cable Length | 1080 mm |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Placement on Vehicle | Front |
| Type | Wiper Motor |
| Weight | 1.05 kg |
| Rated Power | 30 W |
| Driver Position | for left-hand drive vehicles |
| Function | Wiper Motor |
£34.45
Important compatibility info
| Weight | 0.544 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.061 kg |
| Number of Connectors / Ports | 2 |
| Cable Length | 870 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Type | Oil Dipstick |
| Length from grip collar to max. marking | 568 mm |
| Length from grip collar to min. marking | 587 mm |
| Extra Description | febi Plus |
| Function | Oil Dipstick |
| Weight | 0.34 kg |
| Additional Information | with guide funnel/tube |
| Colour | Orange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Dipstick (47303)
- 1x Febi Tube, oil dipstick (180728)
£34.45
Important compatibility info
| Weight | 0.35 kg |
| Width | 30 mm |
| Outer diameter | 86 mm |
| Function | Tensioner Pulley, timing belt |
| for OE number | 6 635 941 |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle |
| Length | 69.5 mm |
| Outer diameter | 35 mm. 30 mm |
| Inner diameter | 12 mm |
| Function | Mounting and Bolting Kit, control/trailing arm |
| Weight | 0.200 kg |
| for OE number | 33 32 9 058 822 |
| Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
Technical Information
Excentric type for track correction of vehicles with lowered suspension (non-factory).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (04048)
£34.45
Important compatibility info
| Housing Diameter | 18 mm |
| Eject Force | 400 N |
| Stroke | 99 mm |
| Mounting points diameter | 17.8 mm |
| Length | 311 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 180.5 mm |
| Weight | 0.164 kg |
| Type | Gas Spring, bonnet |
| Additional Information | Change interval/date according to gas spring imprint |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.320 kg |
| Length | 2700 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.351 kg |
| Placement on Vehicle | Charge Air Cooler, Left |
| Wall Thickness | 4.5 mm |
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Inner diameter | 70 mm |
| Type | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Material | AEM (Ethylene Acrylate Rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (103083)
- 1x Febi Fastening Clamp, charge air hose (39026)
£34.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023