Important compatibility info
for OE number | 06H 121 132 H |
Weight | 0.060 kg |
Type | Coolant Flange |
Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 708 mm |
Function | Cable Pull, door release |
Weight | 0.23 kg |
Paired article numbers | 186185 |
Type | Cable Pull, door release |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 96 mm |
Material | Plastic |
Outer diameter | 80 mm |
Inner diameter | 73 mm |
Number of Connectors / Ports | 4 |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Additional Information 2 | Control Unit/Software must be trained/updated |
Weight | 0.18 kg |
Housing Type | with housing |
Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with oil sump gasket |
Weight | 0.235 kg |
Length | 180 mm |
Height | 71 mm |
Width | 157 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Centre |
Material | Aluminium |
Outer diameter | 40 mm |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 37799 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.465 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chemical Properties | not resistant to rapeseed oil |
Length | 75 mm |
Height | 53 mm |
Width | 75 mm |
Filter type | Filter Insert, Pre-Filter, with water separator |
Type | Fuel filter |
Function | Fuel filter |
Weight | 0.064 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.011 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, automatic transmission |
Type | Mounting, automatic transmission |
Replaces | 18742 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.203 kg |
Length | 1990 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 21.4 kg |
Placement on Vehicle | Rear Axle |
Steering arm type | Triangular Control Arm (CV) |
Pipe Diameter | 46 mm |
Function | Control/Trailing Arm, wheel suspension |
Wishbone Angle Measurement | 47 ° |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 360 mm |
Height | 35 mm |
Width | 245 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Weight | 0.13 kg |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod End |
Weight | 0.7 kg |
Extra Description | ProKit |
Type | Tie Rod End |
External Thread Size | M14 x 2 |
Internal Thread Size | M16 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.8 kg |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 40426 |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information | with rubber mounts, with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left |
Type | Ball Joint |
Function | Ball Joint |
Extra Description | ProKit |
Weight | 5.905 kg |
Thickness | 175 mm |
External Thread Size | M30 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Additional Information | with fastening/mounting material |
Weight | 1.560 kg |
Placement on Vehicle | Rear Axle Upper, Rear Axle Left, Rear Axle Right |
Rod/Strut | Guide Rod |
Function | Rod/Strut, wheel suspension |
Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rod/Strut, wheel suspension (45999)
- 2x Febi Bolt, control arm (43405)
Important compatibility info
Type | Oil Separator, crankcase ventilation |
Function | Oil Separator, crankcase ventilation |
Weight | 0.419 kg |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 30 mm |
Function | Mounting, stabiliser bar |
Placement on Vehicle | Front Axle |
Material | Rubber |
Weight | 0.08 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 98 mm |
Outer diameter | 83 mm |
Filter type | Spin-on Filter, with water drain screw |
Seal Diameter | 71 mm |
Internal Thread Size | M16 x 1,5 |
Function | Fuel filter |
Type | Fuel filter |
Weight | 0.34 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bellow, air suspension |
Weight | 6.2 kg |
Function | Bellow, air suspension |
Rolling piston material | Plastic |
Port / Connector type | Voss 232 |
Thickness | 235 mm. 660 mm |
Outer diameter | 258 mm. 200 mm |
Placement on Vehicle | Rear Axle |
External Thread Size | M22 x 1,5, M16 x 1,5 |
Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Weight | 0.320 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (184288)
- 2x Febi Protective Cap/Bellow, shock absorber (40088)
Important compatibility info
Placement on Vehicle | both sides |
Length | 420 mm |
Housing Diameter | 19 mm |
Eject Force | 600 N |
Stroke | 151 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Weight | 0.260 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023