Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.2 kg |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 327 mm |
| Outer diameter | 166 mm |
| Type | Suspension Spring |
| Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.48
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 620 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.48
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Weight | 0.210 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 60 mm |
| Material | Plastic |
| Mounting points diameter | 10 mm |
| Inner diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with top |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.47
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.080 kg |
| Paired article numbers | 178005 |
| Function | Sensor, wheel speed |
| Cable Length | 735 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.46
Important compatibility info
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 48 mm |
| Outer diameter | 86.5 mm |
| Width | 42 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Weight | 0.928 kg |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174117)
- 1x Febi Circlip (174295)
£34.46
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | both sides |
| Length | 405 mm |
| Housing Diameter | 19 mm |
| Eject Force | 615 N |
| Stroke | 130 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 238 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Weight | 0.1 kg |
| Type | Washer Fluid Pump, window cleaning |
| for OE number | 28920-AR000 |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Length | 1170 mm |
| Colour | Blue |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
| Weight | 0.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.35 kg |
| Width | 30 mm |
| Outer diameter | 86 mm |
| Function | Tensioner Pulley, timing belt |
| for OE number | 6 635 941 |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.032 kg |
| Length | 54 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from distributor to engine cooler |
| Type | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information 2 | with quick couplers |
| Weight | 0.52 kg |
| Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Placement on Vehicle | Front |
| Type | Wiper Motor |
| Weight | 1.05 kg |
| Rated Power | 30 W |
| Driver Position | for left-hand drive vehicles |
| Function | Wiper Motor |
£34.45
Important compatibility info
| Weight | 0.407 kg |
| Length | 2990 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.544 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.081 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Cable Length | 1080 mm |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Placement on Vehicle | Right Rear, Left Rear |
| Length | 1779 mm |
| Weight | 0.505 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.351 kg |
| Placement on Vehicle | Charge Air Cooler, Left |
| Wall Thickness | 4.5 mm |
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Inner diameter | 70 mm |
| Type | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Material | AEM (Ethylene Acrylate Rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (103083)
- 1x Febi Fastening Clamp, charge air hose (39026)
£34.45
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 527 mm |
| Weight | 0.030 kg |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Function | Expansion Tank, coolant |
| Weight | 0.300 kg |
| Type | Expansion Tank, coolant |
| for OE number | 2 088 138 |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Material | Aluminium |
| Inner diameter | 10 mm |
| Steering arm type | Control Arm |
| Thread Length | 22 mm |
| Cone Size | 24.5 mm. 21 mm |
| Weight | 1.44 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| External Thread Size | M12 x 1,5 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023