Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.526 kg |
| Length | 105 mm |
| Width | 105 mm |
| Function | Dust Cover Kit, shock absorber |
| for OE number | 2N0 412 303 E S1 |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
- 2x Febi Rubber Buffer, suspension (170031)
£33.50
Important compatibility info
| Weight | 0.518 kg |
| Placement on Vehicle | both sides |
| Length | 630 mm |
| Housing Diameter | 28 mm |
| Eject Force | 620 N |
| Stroke | 230 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Wire Diameter | 14.5 mm |
| Weight | 2.65 kg |
| Placement on Vehicle | Rear Axle |
| Length | 302 mm |
| Outer diameter | 101 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.95 kg |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting points diameter | 13.5 mm. 12.5 mm |
| Cone Size | 16 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 2.406 kg |
| Placement on Vehicle | Front Axle |
| Length | 340 mm |
| Outer diameter | 146 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.371 kg |
| Engine Management | Timing Chain |
| Type | Sprocket, crankshaft |
| Function | Sprocket, crankshaft |
| Number of Teeth | 21. 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Additional Information 2 | with crown nut |
| External Thread Size | M20 x 1,5 |
| Type | Angled Ball Joint, steering push rod |
| Cone Size | 26 mm |
| Weight | 1.4 kg |
| Extra Description | ProKit |
| Function | Angled Ball Joint, steering push rod |
| Placement on Vehicle | Front Axle |
| Length | 115 mm |
| Internal Thread Size | M24 x 1,5 |
| Width | 35 mm |
| Thickness | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Slave Cylinder |
| Type | Slave Cylinder |
| Stroke | 48 mm |
| Inner diameter | 8 mm |
| External Thread Size | M8 x 1,25, M12 x 1,5 |
| Weight | 0.222 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Paired article numbers | 24872 |
| Colour | Black |
| Function | Exterior Door Handle |
| Weight | 0.440 kg |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Outer diameter | 84 mm. 92 mm |
| Weight | 2.4 kg |
| Number of Coils | 5.5 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Length | 387 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Gasket, cylinder head cover |
| Length | 1084 mm |
| Material | ACM (Polyacrylate) |
| Weight | 0.284 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 161 mm |
| Outer diameter | 92 mm |
| External Teeth, Wheel Side | 29 |
| Seal Diameter | 74 mm |
| Internal Teeth, wheel side | 26 |
| Weight | 2.960 kg |
| Function | Joint Kit, drive shaft |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 92 °C |
| Number of Connectors / Ports | 2 |
| Type | Thermostat, coolant |
| Weight | 0.354 kg |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Length | 1740 mm |
| Outer diameter | 8 mm |
| Weight | 0.15 kg |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Inner diameter | 4.2 mm |
| External Thread Size | M12 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 193248 |
| Weight | 0.5 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 320 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.112 kg |
| Cable Length | 185 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Length | 298 mm |
| Outer diameter | 135 mm |
| Function | Suspension Spring |
| Weight | 3.15 kg |
| Placement on Vehicle | Front Axle |
| Type | Suspension Spring |
| Wire Diameter | 15.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 69 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 8 mm |
| Brake Disc Thickness | 10 mm |
| Thickness | 38.4 mm |
| Outer diameter | 250 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 3.390 kg |
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Type | Timing Belt |
| Number of Teeth | 130 |
| Weight | 0.146 kg |
| Function | Timing Belt |
| Width | 23 mm |
| Width of castor bearing surface | 23 mm |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Weight | 0.338 kg |
| Placement on Vehicle | both sides |
| Length | 480 mm |
| Housing Diameter | 22 mm |
| Eject Force | 690 N |
| Stroke | 180 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing length | 278.5 mm |
| Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023