Important compatibility info
Placement on Vehicle | both sides |
Length | 540 mm |
Weight | 0.2 kg |
Housing Diameter | 20 mm |
Eject Force | 555 N |
Stroke | 180 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 327 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.00 kg |
Placement on Vehicle | Front Axle |
Width | 158 mm |
Material | Rubber/Metal |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Length | 143 mm |
Height | 65 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.232 kg |
Additional Information 2 | Requires special tools for mounting |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 84 |
Timing Chain Size | G53HR |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Additional Information | with gasket/seal |
Number of Wings | 18 |
Weight | 0.65 kg |
Number of Teeth | 18 |
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M18 x 1,5 |
Weight | 0.061 kg |
Length | 55 mm |
Operating Mode | Mechanical |
Spanner Size | 27 |
Control Type | Push Actuation |
Function | Switch |
Type | Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.07 kg |
Placement on Vehicle | Front Axle |
Length | 193 mm |
Width | 73.8 mm. 70.8 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 20 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.380 kg |
Number of Teeth | 114 |
Belts | with rounded tooth profile |
Function | Timing Belt Kit |
Width | 17 mm |
Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10995)
- 1x Febi Tensioner Pulley, timing belt (04880)
Important compatibility info
Filter type | Screen Filter |
Seal Material | ACM (Polyacrylate) |
Weight | 0.4742 kg |
Function | Hydraulic Filter Kit, automatic transmission |
Transmission Type | Automatic Transmission |
Additional Information 2 | with bolts/screws, with overflow pipe, with oil sump gasket |
Type | Hydraulic Filter Kit, automatic transmission |
not for SA code | A89 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (24538)
- 1x Febi Gasket, automatic transmission oil sump (30156)
- 1x Febi Hose, transmission oil cooler (40235)
- 1x Febi Screw Plug, oil sump (46332)
- 1x Febi Seal Ring, oil drain plug (04054)
- 6x Febi Bolt, automatic transmission oil tray (46389)
Important compatibility info
Length | 261 mm |
Function | Inner Tie Rod |
Weight | 0.44 kg |
External Thread Size | M12 x 1,25, M14 x 1,5 |
Additional Information | with counter nut |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber/Metal |
Outer diameter | 85 mm |
Weight | 2.7 kg |
Function | Repair Kit, control/trailing arm |
Mounting points diameter | 23 mm |
Steering arm type | for triangular control arm (CV) |
Hole Spacing | 152 mm |
Type | Repair Kit, control/trailing arm |
Additional Information 2 | with retaining ring, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 77.5 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Weight | 0.025 kg |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.7 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32100)
- 1x Febi Air Filter (38406)
- 1x Febi Filter, cabin air (27868)
- 4x Febi Spark Plug (13406)
Important compatibility info
Weight | 1.579 kg |
Steering arm type | Control Arm |
Additional Information | with rubber-metal mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Upper, Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 42 mm |
Width | 34 mm |
Outer diameter | 7 mm |
Thickness | 35 mm |
Number of Connectors / Ports | 3 |
Weight | 0.015 kg |
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
for OE number | 006 153 99 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.703 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Material | Plastic |
Number of Connectors / Ports | 8 |
Control Type | Rotary Operation |
Function | Ignition Switch |
Extra Description | febi Plus |
Type | Ignition Switch |
Replaces | 37342 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.234 kg |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Rim Hole Number | 4 -Hole |
Weight | 3.486 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 260 mm |
Thickness | 31.2 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 61 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Length | 320 mm |
Number of Connectors / Ports | 2 |
Weight | 0.112 kg |
Cable Length | 185 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Function | Mounting, automatic transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Weight | 0.662 kg |
Colour Coding | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023