Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 52 |
| Weight | 2.800 kg |
| Internal Teeth, wheel side | 26 |
| Seal Diameter | 60 mm |
| External Teeth, Wheel Side | 27 |
| Outer diameter | 94.5 mm |
| Length | 164 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Length | 240 mm |
| Type | Intake Valve |
| Function | Intake Valve |
| Notches / Holes Number | 1 |
| Weight | 0.194 kg |
| Valve head diameter | 47.05 mm |
| Valve stem diameter | 9.275 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Rated Power | 40 W |
| Voltage | 12 V |
| Placement on Vehicle | Front |
| Weight | 1.05 kg |
| Function | Wiper Motor |
| Type | Wiper Motor |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 0.296 kg |
| Placement on Vehicle | both sides |
| Length | 497 mm |
| Eject Force | 510 N |
| Stroke | 181 mm |
| Housing Diameter | 19 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 1.506 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 120 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 100 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 0.48 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 192181 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 0.1 kg |
| Opening Temperature | 85 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Thickness | 79.2 mm |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
| Opening Temperature | 87 °C |
| Weight | 0.335 kg |
| Additional Information 2 | with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 182329 |
| Number of Connectors / Ports | 2 |
| Weight | 0.180 kg |
| Cable Length | 1210 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Belts | with rounded tooth profile |
| Number of Teeth | 132 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Function | Timing Belt |
| Weight | 0.16 kg |
| Width | 26 mm |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Weight | 0.11 kg |
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.825 kg |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sensor, coolant level (24052)
£32.47
Important compatibility info
| Number of Connectors / Ports | 3 |
| Cable Length | 370 mm |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
| Weight | 0.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 0.444 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Hose Length | 300 mm |
| for OE number | 17 12 7 536 230 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.46
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 1365 mm |
| Weight | 0.068 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.46
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 27 |
| Weight | 1.812 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.45
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 657 mm |
| Weight | 0.2 kg |
| Housing Diameter | 22 mm |
| Eject Force | 540 N |
| Stroke | 200 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 429 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.44
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 0.87 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.44
Important compatibility info
| Weight | 1.007 kg |
| Placement on Vehicle | Front |
| Material | Aluminium |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.44
Important compatibility info
| Force output F | 435 N |
| Function | Vibration Damper, v-ribbed belt |
| Weight | 0.275 kg |
| Type | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.44
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023