Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Lower Front Axle, Right |
| Steering arm type | Control Arm |
| Paired article numbers | 12088 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Weight | 1.750 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.17
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Operating Mode | Manual |
| Paired article numbers | 09854 |
| Function | Adjuster, braking system |
| Weight | 2.578 kg |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.17
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Weight | 1.252 kg |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.17
Important compatibility info
| Thickness | 29.8 mm |
| Inner diameter | 10 mm |
| Function | Mounting, steering gear |
| Weight | 0.44 kg |
| Outer diameter | 19 mm. 24 mm. 35 mm. 37.8 mm |
| Material | Rubber/Metal |
| Type | Mounting, steering gear |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Mounting, steering gear (27637)
£33.17
Important compatibility info
| Function | Air Filter |
| Height | 387 mm |
| Outer diameter | 203 mm |
| Inner diameter | 95 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
| Weight | 1.440 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.17
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 6Q0 199 851 AT |
| Placement on Vehicle | Rear |
| Weight | 1.500 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.16
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.03 kg |
| for OE number | 46350837 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.16
Important compatibility info
| Weight | 0.120 kg |
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.16
Important compatibility info
| Weight | 0.326 kg |
| Width | 25 mm |
| Outer diameter | 60 mm |
| Inner diameter | 8 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.15
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.334 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.14
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Weight | 0.568 kg |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.14
Important compatibility info
| Weight | 0.176 kg |
| Bore Diameter | 21 mm |
| Fill Medium | Brake Fluid |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.14
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 226 mm |
| Weight | 0.150 kg |
| Function | Gas Spring, boot/cargo area |
| Housing Diameter | 18 mm |
| Eject Force | 100 N |
| Stroke | 70 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.14
Important compatibility info
| Weight | 2.4 kg |
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Repair Kit, brake caliper |
| Type | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.12
Important compatibility info
| Weight | 1.428 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 37865 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (36585)
- 1x Febi Inner Tie Rod (30037)
£33.12
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170525 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Weight | 2.95 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.12
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 330 mm |
| Function | Suspension Spring |
| Outer diameter 1 | 91 mm |
| Outer diameter 2 | 137 mm |
| Wire Diameter | 12 mm |
| Type | Suspension Spring |
| Weight | 2.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.12
Important compatibility info
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
| Weight | 0.661 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.11
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Mechanical |
| Housing material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.438 kg |
| Width of castor bearing surface | 24.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.11
Important compatibility info
| Weight | 0.201 kg |
| Material | Plastic |
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 000 202 18 19 |
| Width of castor bearing surface | 26 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.10
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023