Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Outer diameter | 107 mm |
| Weight | 0.24 kg |
| Spanner Size | 36 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Extra Description | febi Plus |
| Height | 312 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.883 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 028 121 004 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| External Thread Size | M20 x 1, M20 x 1,5 |
| Weight | 0.980 kg |
| Spanner Size | 42 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 226 mm |
| Additional Information | with counter nut |
| Outer diameter | 47 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 559 mm |
| Min. Length | 344 mm |
| Pipe Diameter | 39 mm. 51 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber |
| Weight | 4.1 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| for OE number | 11 15 7 559 528 |
| Weight | 0.143 kg |
| Hose Length | 490 mm |
| Height | 130 mm |
| Width | 240 mm |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 19 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 1.708 kg |
| Placement on Vehicle | Rear Axle |
| Length | 120 mm |
| Outer diameter | 42 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 351 mm |
| Function | Suspension Spring |
| Outer diameter | 152 mm |
| Weight | 2.48 kg |
| Wire Diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Function | Cable Repair Set, boot lid |
| Number of circuits | 9 |
| Cable Length | 600 mm |
| Extra Description | febi Plus |
| Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.56 kg |
| Length | 180 mm |
| Width | 52 mm |
| Thickness | 105 mm |
| Inner diameter | 30 mm |
| Placement on Vehicle | Front |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| ABS Ring Diameter | 84 mm |
| Number of Teeth, ABS ring | 47 |
| Weight | 1.894 kg |
| External Teeth, Wheel Side | 33 |
| Thread Size | M20x1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 49 mm |
| Internal Teeth, wheel side | 21 |
| Weight | 1.860 kg |
| Type | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Function | Joint Kit, drive shaft |
| Outer diameter | 75 mm |
| Length | 147 mm |
| Placement on Vehicle | Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Cable Length | 835 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Internal Thread Size | M125 x 2 |
| Weight | 0.630 kg |
| Spanner Size | 110 |
| Type | Protection Lid, wheel hub |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 0.217 kg |
| Placement on Vehicle | both sides |
| Length | 450 mm |
| Housing Diameter | 18 mm |
| Eject Force | 455 N |
| Stroke | 144 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 353 mm |
| Outer diameter | 110 mm |
| Weight | 2.379 kg |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Thread Size | M10x1,5 |
| Internal Teeth, wheel side | 28 |
| Weight | 2.134 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 2.08 kg |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Additional Information | with grease |
| Additional Information 2 | with clamps |
| External Teeth, Wheel Side | 36 |
| Bellows Material | Thermoplast |
| Outer diameter 1 | 81 mm |
| Outer diameter 2 | 53 mm |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33251)
- 1x Febi Bellow, drive shaft (03596)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (08023)
£31.52
Important compatibility info
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.514 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Upper, Rear Axle Left, Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Weight | 1.986 kg |
| Int. teeth, diff.side, conn.to transm. | 34 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Paired article numbers | 24886 |
| Colour | Black |
| Function | Exterior Door Handle |
| Weight | 0.780 kg |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023