Important compatibility info
Weight | 0.07 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 673 mm |
Colour | Blue, Black |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.262 kg |
Placement on Vehicle | both sides |
Length | 560 mm |
Housing Diameter | 18 mm |
Eject Force | 290 N |
Stroke | 221 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Housing length | 305.5 mm |
Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Weight | 1.8 kg |
Internal Teeth, wheel side | 22 |
Seal Diameter | 51 mm |
External Teeth, Wheel Side | 25 |
Outer diameter | 80 mm |
Length | 141 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Function | Joint Kit, drive shaft |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Replaced by | 24341 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Outer diameter | 110 mm |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Thickness | 68 mm |
Function | Mounting, engine |
Internal Thread Size | M10 x 1,5 |
Type | Mounting, engine |
Replaces | 28169; 28170 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 30 |
Weight | 1.898 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.883 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
for OE number | 028 121 004 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Coils | 4.6 |
Type | Suspension Spring |
Function | Suspension Spring |
Outer diameter | 145 mm |
Length | 322 mm |
Weight | 1.5 kg |
Placement on Vehicle | Front Axle |
Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.34 kg |
Thickness | 1.74 mm |
Function | Gasket, cylinder head |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.193 kg |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Resistance | 1150 Ohm |
Cable Length | 2690 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 246.5 mm |
Valve stem diameter | 9.450 mm |
Valve head diameter | 40 mm |
Weight | 0.188 kg |
Notches / Holes Number | 1 |
Type | Exhaust Valve |
Function | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 321 498 350 X |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Weight | 1.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33241)
- 1x Febi Bellow, drive shaft (03334)
- 1x Febi Clamping Clip (38758)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (03336)
- 1x Febi Circlip (03335)
Important compatibility info
Additional Information 2 | with bearing |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.514 kg |
Steering arm type | Control Arm |
Placement on Vehicle | Upper, Rear Axle Left, Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Teeth, wheel side | 22 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
ABS Ring Diameter | 84 mm |
Number of Teeth, ABS ring | 47 |
Weight | 1.894 kg |
External Teeth, Wheel Side | 33 |
Thread Size | M20x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Manufacturer Restriction | Bosch (ABS/ESP 8.1) |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.986 kg |
Int. teeth, diff.side, conn.to transm. | 34 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 32 mm |
Outer diameter | 73.2 mm |
Function | Tensioner Pulley, timing belt |
Weight | 0.51 kg |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.530 kg |
Placement on Vehicle | both sides |
Length | 667 mm |
Housing Diameter | 22 mm |
Eject Force | 755 N |
Stroke | 238 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 394.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information | with stop function |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 2.039 kg |
Placement on Vehicle | Front Axle, Centre |
Length | 521 mm |
Cone Size | 14.6 mm |
Pipe Diameter | 30 mm |
Function | Tie Rod |
Type | Tie Rod |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.08 kg |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 30 |
Additional Information | with grease |
Additional Information 2 | with clamps |
External Teeth, Wheel Side | 36 |
Bellows Material | Thermoplast |
Outer diameter 1 | 81 mm |
Outer diameter 2 | 53 mm |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33251)
- 1x Febi Bellow, drive shaft (03596)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (08023)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023