Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.235 kg |
| Paired article numbers | 39041 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (19935)
- 1x Febi Tie Rod End (10659)
- 1x Febi Bellow, steering (29206)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
£23.31
Important compatibility info
| Thickness | 79.2 mm |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
| Opening Temperature | 87 °C |
| Weight | 0.335 kg |
| Additional Information 2 | with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Weight | 0.135 kg |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Resistance | 1200 Ohm |
| Function | Sensor, wheel speed |
| Cable Length | 1680 mm |
| Number of Connectors / Ports | 2 |
| Length | 1780 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.35
Important compatibility info
| Weight | 0.110 kg |
| Material | Plastic |
| Function | Coolant Flange |
| Placement on Vehicle | Cylinder Head |
| Type | Coolant Flange |
| for OE number | 028 121 132 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.35
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Weight | 0.016 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.63
Important compatibility info
| Height | 103 mm |
| Outer diameter | 84 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 76 mm |
| Weight | 0.413 kg |
| Type | Oil Filter |
| Internal Thread Size | M26 x 1,5 |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.68
Important compatibility info
| Weight | 0.02 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Inner diameter | 17 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.51
Important compatibility info
| Number of Connectors / Ports | 6 |
| Weight | 0.765 kg |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.69
Important compatibility info
| Type | Air Filter |
| Length | 334 mm |
| Height | 35 mm |
| Width | 137 mm |
| Filter type | Filter Insert |
| Weight | 0.073 kg |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.23
Important compatibility info
| Weight | 0.223 kg |
| Placement on Vehicle | both sides |
| Length | 475 mm |
| Housing Diameter | 18 mm |
| Eject Force | 490 N |
| Stroke | 170 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.15
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 132 mm |
| Outer diameter | 132 mm |
| Thickness | 32 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Weight | 0.568 kg |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.85
Important compatibility info
| Weight | 0.12 kg |
| Height | 77 mm |
| Outer diameter | 90 mm |
| Inner diameter | 14 mm |
| Filter type | Filter Insert |
| Seal Diameter | 101 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.69
Important compatibility info
| Function | Mounting, stabiliser bar |
| Weight | 0.02 kg |
| Placement on Vehicle | Rear Axle |
| Material | Rubber |
| Inner diameter | 15 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.09
Important compatibility info
| Weight | 0.97 kg |
| Material | Rubber/Metal |
| Outer diameter | 135 mm. 132 mm |
| Thickness | 30 mm |
| Inner diameter | 50 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (04435)
- 1x Febi Assembly Kit, propshaft joint (43424)
£72.19
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 421 mm |
| Housing length | 242.5 mm |
| Function | Gas Spring, boot/cargo area |
| Stroke | 151 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Housing Diameter | 18 mm |
| Eject Force | 450 N |
| Weight | 0.210 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.76
Important compatibility info
| Weight | 7.4 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 295 mm |
| Thickness | 51.1 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.52
Important compatibility info
| Hose Length | 220 mm |
| Function | Hose, crankcase ventilation |
| Weight | 0.072 kg |
| for OE number | 102 094 25 87 |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.87
Important compatibility info
| Weight | 0.53 kg |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Cone Size | 18 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| External Thread Size | M16 x 1,5 |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.22
Important compatibility info
| Weight | 3.849 kg |
| Outer diameter | 53 mm |
| Length | 235 mm |
| Function | Kingpin |
| Type | Kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.13
Important compatibility info
| Placement on Vehicle | Centre |
| Length | 204 mm |
| Thickness | 120 mm |
| Function | Suspension, propshaft |
| Weight | 0.32 kg |
| Width | 45 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023