Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.04 kg |
| Placement on Vehicle | Front Axle |
| Length | 165 mm |
| Width | 165 mm |
| Material | Rubber/Metal |
| Thickness | 51 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.91
Important compatibility info
| Function | Cable Pull, parking brake |
| Weight | 1.150 kg |
| Placement on Vehicle | Rear |
| Length | 1585 mm |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.91
Important compatibility info
| Weight | 2.31 kg |
| Placement on Vehicle | Front Axle |
| Length | 429 mm |
| Outer diameter | 172 mm |
| Function | Suspension Spring |
| Wire Diameter | 13 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.91
Important compatibility info
| Additional Information 2 | without wheel bearing |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Weight | 1.837 kg |
| Bolt Hole Circle Diameter | 114.3 mm |
| Inner diameter | 29.6 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 139 mm |
| Width | 68 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.89
Important compatibility info
| Weight | 0.771 kg |
| Material | Cast Aluminium |
| Number of Teeth | 20 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with studs |
| for OE number | 82 00 146 298 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.89
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right |
| Weight | 0.073 kg |
| Cable Length | 1840 mm |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 171102 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.89
Important compatibility info
| Weight | 1.23 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| for OE number | 03 44 537 S2 |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (27352)
- 1x Febi Rolling Bearing, suspension strut support mount (27996)
- 1x Febi Rubber Buffer, suspension (27847)
- 3x Febi Screw (27358)
£31.89
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 1.714 kg |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 30 |
| Internal Teeth, wheel side | 27 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.88
Important compatibility info
| Height | 123 mm |
| Outer diameter | 104 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Weight | 0.16 kg |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.87
Important compatibility info
| Weight | 0.217 kg |
| Function | Hose, air supply |
| Extra Description | febi Plus |
| Type | Hose, air supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.86
Important compatibility info
| Weight | 0.014 kg |
| Length | 42 mm |
| Width | 48 mm |
| Thickness | 35 mm |
| Inner diameter | 6.5 mm |
| Number of Connectors / Ports | 3 |
| Hole Spacing | 34 mm |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.86
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.136 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.86
Important compatibility info
| Weight | 1.708 kg |
| Placement on Vehicle | Rear Axle |
| Length | 120 mm |
| Outer diameter | 42 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.85
Important compatibility info
| Width | 32 mm |
| Outer diameter | 73.2 mm |
| Function | Tensioner Pulley, timing belt |
| Weight | 0.51 kg |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.85
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 54 mm |
| Thickness | 54 mm |
| Inner diameter | 12.4 mm |
| Weight | 0.131 kg |
| Shape/Form | slotted |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.85
Important compatibility info
| Function | Mounting Kit, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Inner diameter | 20 mm |
| Weight | 0.342 kg |
| External Thread Size | M8 x 1,25 |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Fastening Bolt, stabiliser bar (46148)
- 1x Febi Bracket, stabiliser mounting (40443)
- 1x Febi Bracket, stabiliser mounting (40444)
- 2x Febi Mounting, stabiliser bar (17807)
£31.85
Important compatibility info
| Cable Length | 835 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.85
Important compatibility info
| Function | Cable Repair Set, boot lid |
| Number of circuits | 9 |
| Cable Length | 600 mm |
| Extra Description | febi Plus |
| Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.85
Important compatibility info
| Outer diameter | 154 mm |
| Thickness | 170 mm |
| Inner diameter | 107 mm |
| Function | Mounting, leaf spring |
| Weight | 2.182 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.84
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Weight | 3.628 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 231 mm |
| Thickness | 44.1 mm |
| Brake Disc Thickness | 17 mm |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.84
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023