Important compatibility info
Material | Rubber/Metal |
Function | Bushing, axle beam |
Thickness | 79 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Inner diameter | 12 mm |
Weight | 0.508 kg |
Outer diameter | 70 mm |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Centre |
Width | 18 mm |
Outer diameter | 151 mm |
Inner diameter | 90 mm |
Weight | 0.323 kg |
Type | Shaft Seal, differential |
Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Length | 215 mm |
Thickness | 90 mm |
Spanner Size | 19 |
Paired article numbers | 42759 |
Type | Tie Rod End |
Function | Tie Rod End |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.682 kg |
Placement on Vehicle | Front Axle Left, Rear |
Length | 92 mm |
Width | 58 mm |
Thickness | 175 mm |
Inner diameter | 14.3 mm. 69.8 mm |
Paired article numbers | 40967 |
Mounting points diameter | 10.4 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Function | Guide, timing chain |
Type | Guide, timing chain |
Weight | 0.136 kg |
for OE number | SH02-12-610A |
Friction Lining Material | Plastic |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.424 kg |
Inner Length | 785 mm |
Outer Length | 1095 mm |
Type | Cable Pull, clutch control |
Function | Cable Pull, clutch control |
Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.36 kg |
Thickness | 141 mm |
Material | Rubber/Metal |
Width | 61 mm |
Length | 230 mm |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.69 kg |
Placement on Vehicle | Front Axle Left, Upper, Front |
Steering arm type | Control Arm |
Paired article numbers | 27502 |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Number of Connectors / Ports | 3 |
Function | RPM Sensor, automatic transmission |
Type | RPM Sensor, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 86 mm. 59 mm |
Weight | 1.3 kg |
Inner diameter | 44 mm |
Type | Bellow, driver cab suspension |
Function | Bellow, driver cab suspension |
Length | 300 mm |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 55 mm |
Type | Bracket, stabiliser mounting |
Weight | 0.929 kg |
Function | Bracket, stabiliser mounting |
Bore Diameter | 96 mm |
Radius | 32.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5, M22 x 1,5 |
Weight | 0.33 kg |
External Thread Size | M20 x 1,5 |
Length | 104 mm |
Height | 72 mm |
Width | 72 mm |
Type | Hand Feed Pump |
Function | Hand Feed Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 37 mm |
Inner diameter | 40 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Weight | 0.829 kg |
Additional Information 2 | with retaining ring |
Sealing lip material | NBR (nitrile butadiene rubber) |
Outer diameter | 75 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.69 kg |
Placement on Vehicle | Front Axle Right, Front, Upper |
Steering arm type | Control Arm |
Paired article numbers | 27503 |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 50 mm |
Weight | 0.241 kg |
Function | Deflection/Guide Pulley, v-ribbed belt |
Mounting points diameter | 10 mm |
Material | Metal |
Width of castor bearing surface | 23 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Repair Kit, brake caliper |
Function | Repair Kit, brake caliper |
Weight | 0.5 kg |
Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Seal Kit, multi-valve |
Weight | 0.629 kg |
Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.662 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter 1 | 35 mm |
Inner diameter 2 | 22 mm |
Outer diameter 1 | 62 mm |
Width 1 | 18 mm |
Outer diameter 2 | 50 mm |
Width 2 | 17.5 mm |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (08953)
- 1x Febi Cap, wheel bearing (04947)
- 1x Febi Shaft Seal, wheel hub (27165)
- 1x Febi Nut, kingpin (27166)
- 1x Febi Wheel Bearing (27164)
- 1x Febi Wheel Bearing (27163)
Important compatibility info
Cable Length | 820 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 107582 |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Weight | 0.076 kg |
Additional Information 2 | with retaining strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 20.4 mm. 19.6 mm |
Type | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Weight | 2.990 kg |
Additional Information 2 | with piston clip |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Length | 193.2 mm |
Width | 79.2 mm |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023