Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Replaced by | 24341 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.597 kg |
Seal Material | Rubber |
Water pump impeller material | Metal |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Material | Cast Aluminium |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Outer diameter | 110 mm |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Thickness | 68 mm |
Function | Mounting, engine |
Internal Thread Size | M10 x 1,5 |
Type | Mounting, engine |
Replaces | 28169; 28170 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Width | 22 mm |
Material | Metal |
Outer diameter | 50 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Teeth, wheel side | 22 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
ABS Ring Diameter | 84 mm |
Number of Teeth, ABS ring | 47 |
Weight | 1.894 kg |
External Teeth, Wheel Side | 33 |
Thread Size | M20x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.211 kg |
Type | Gasket, cylinder head |
Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 249 mm |
Thickness | 35 mm |
Brake Disc Thickness | 10 mm |
Rotor Style | Solid |
Function | Brake Disc |
Centering Diameter | 71 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 108 mm |
Surface | Coated |
Weight | 3.0 kg |
Number of mounting bores | 2 |
Rim Hole Number | 4 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Spring |
Number of Coils | 5.8 |
Outer diameter | 144 mm |
Length | 244 mm |
Placement on Vehicle | Rear Axle |
Type | Suspension Spring |
Weight | 2.63 kg |
Wire Diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Weight | 0.388 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Weight | 1.8 kg |
Internal Teeth, wheel side | 22 |
Seal Diameter | 51 mm |
External Teeth, Wheel Side | 25 |
Outer diameter | 80 mm |
Length | 141 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Function | Joint Kit, drive shaft |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Placement on Vehicle | Lower |
Weight | 0.097 kg |
for OE number | 06H 115 243 L |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 265 mm |
Function | Hydraulic Hose, steering |
Material | Rubber |
Type | Hydraulic Hose, steering |
Additional Information | with quick coupling |
Weight | 0.177 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 22 |
Weight | 1.892 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, brake camshaft |
Weight | 0.95 kg |
Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (07479)
- 2x Febi Holder, brake camshaft seal ring (07480)
- 1x Febi Holder, brake camshaft seal ring (08472)
- 3x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Stop Plate, adjuster (07483)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07485)
- 1x Febi Spacer, brake shaft (07486)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07491)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01094)
Important compatibility info
Wire Diameter | 12.8 mm |
Weight | 1.82 kg |
Function | Suspension Spring |
Type | Suspension Spring |
Length | 351 mm |
Outer diameter | 139 mm |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1375 mm |
Number of Connectors / Ports | 2 |
Weight | 0.075 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Spring |
Type | Suspension Spring |
Weight | 1.870 kg |
Outer diameter | 134 mm |
Length | 330 mm |
Placement on Vehicle | Front Axle |
Wire Diameter | 11.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.671 kg |
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 175380 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Length | 583 mm |
Additional Information | with rubber mounts |
Rod/Strut | Guide Rod |
Weight | 2.196 kg |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 19.2 mm. 21.9 mm |
Outer diameter | 53.1 mm. 63 mm |
Inner diameter | 47.7 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
for OE number | 5131.A6 S1 |
Weight | 0.19 kg |
Function | Repair Kit, axle beam |
Type | Repair Kit, axle beam |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.671 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Paired article numbers | 175395 |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Track rollers material | Metal |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.470 kg |
Paired article numbers | 180287 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.810 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 67 mm |
Thickness | 83 mm |
Inner diameter | 15 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 180288 |
Weight | 2.470 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with holder |
Placement on Vehicle | Front Axle Right |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Thickness | 63 mm |
Outer diameter | 69.7 mm |
Inner diameter | 26 mm |
Paired article numbers | 172047, 174332 |
Weight | 0.682 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 126 mm. 72 mm |
Inner diameter | 29 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with axle nut |
Width | 82 mm |
Weight | 1.97 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 34 mm |
Weight | 0.523 kg |
for OE number | 51.95800.6111 |
Material | Metal |
Outer diameter | 74 mm |
Mounting points diameter | 12 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Steering arm type | Control Arm |
Rod/Strut | Guide Rod |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.532 kg |
Type | Control/Trailing Arm, wheel suspension |
for OE number | 220 350 27 06 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 141 mm |
Width | 293 mm |
Thickness | 215 mm |
Function | Expansion Tank, coolant |
Additional Information 2 | without lid |
Weight | 0.740 kg |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Rear |
Length | 180 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 0.89 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023