Important compatibility info
Weight | 0.211 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Length | 99 mm |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 88 mm |
Function | Bellow Kit, drive shaft |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14908)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.64 kg |
Placement on Vehicle | Rear Axle |
Length | 61.7 mm |
Width | 58.5 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.2 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.73 kg |
Placement on Vehicle | Front Axle |
Length | 131.6 mm |
Width | 59.9 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.9 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Width | 15 mm |
Outer diameter | 66 mm |
Inner diameter | 36 mm |
Function | Mount, exhaust system |
Weight | 0.032 kg |
Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.78 kg |
Width | 31 mm |
Outer diameter | 73 mm |
Type | Tensioner Pulley, timing belt |
Function | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Outer diameter | 12 mm |
Material | Steel |
Function | High Pressure Pipe, injection system |
Type | High Pressure Pipe, injection system |
Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Weight | 1.033 kg |
Inner diameter | 15 mm |
Additional Information 2 | without ball bearing |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Weight | 0.200 kg |
Function | Bellow, steering |
Inner diameter 2 | 46 mm |
Inner diameter 1 | 10 mm |
Length | 210 mm |
Type | Bellow, steering |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Width | 84 mm |
Height | 51 mm |
Length | 205 mm |
Weight | 0.158 kg |
Additional Information 2 | with oil sump gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.100 kg |
Placement on Vehicle | Front Axle |
Material | Rubber |
Inner diameter | 18 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M16 x 1,5 |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Length | 222 mm |
Paired article numbers | 37692 |
Function | Tie Rod End |
Weight | 0.690 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.610 kg |
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 36877 |
Function | Ball Joint |
Steering arm type | for control arm |
Cone Size | 20 mm |
Mounting points diameter | 17.4 mm |
Extra Description | ProKit |
Type | Ball Joint |
External Thread Size | M12 x 1,5 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Weight | 0.745 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 26018 |
DIN / ISO | 985 |
Function | Tie Rod End |
Additional Information | with lock nut |
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Upper, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Rod/Strut | Guide Rod |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.425 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Inspection Tag | ECE R90 Approved |
Additional Information 2 | with piston clip |
Wear Warning Contact | with acoustic wear warning |
Length | 167.1 mm |
Width | 62.6 mm |
Thickness/Strength 1 | 17.6 mm |
Weight | 2.016 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.047 kg |
Length | 129 mm |
Bolt Head/Nut Design | Male Torx |
Quality/ Grade | 10.9 |
Function | Cylinder Head Bolt |
Screw length below head | 118 mm |
Number of screws | 12 |
External Thread Size | M8 x 1,25 |
Type | Cylinder Head Bolt |
Replaces | 15490 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.742 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 296 mm |
Thickness | 57.6 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 6.86 kg |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 278 mm |
Thickness | 44.6 mm |
Brake Disc Thickness | 24 mm |
Minimum thickness | 22 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 63.6 mm |
Surface | Coated |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Width | 22 mm |
Number of Teeth | 107 |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26695)
- 1x Febi Tensioner Pulley, timing belt (17493)
Important compatibility info
Weight | 0.295 kg |
Length | 210 mm |
Height | 48 mm |
Width | 205 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023