Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.272 kg |
| Function | Guide Rails Kit, timing chain |
| Engine Management | Timing Chain |
| Type | Guide Rails Kit, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (10933)
- 1x Febi Guide, timing chain (09167)
- 1x Febi Guide, timing chain (09166)
- 1x Febi Guide, timing chain (09165)
£30.49
Important compatibility info
| Weight | 1.63 kg |
| Wet Sump Material | Steel |
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (14720)
- 1x Febi Screw Plug, oil sump (12281)
£30.49
Important compatibility info
| Internal Teeth, wheel side | 24 |
| Function | Joint Kit, drive shaft |
| Seal Diameter | 58 mm |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 26 |
| Weight | 2.120 kg |
| Number of Teeth, ABS ring | 48 |
| Length | 150 mm |
| Outer diameter | 58 mm |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 0.170 kg |
| Placement on Vehicle | Rear |
| Material | Plastic |
| Function | Wiper Arm, window cleaning |
| Extra Description | febi Plus |
| Type | Wiper Arm, window cleaning |
| Additional Information 2 | with cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 0.53 kg |
| Additional Information 2 | with lid |
| Width | 23 mm |
| Outer diameter | 55.5 mm. 61 mm |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 1.017 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| for OE number | 20576614 |
| Weight | 0.087 kg |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Left, Right |
| Weight | 1.146 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 0.19 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 54 |
| Function | Chain Kit, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (40394)
- 1x Febi Chain Tensioner, oil pump drive (107836)
£30.49
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Length | 870 mm |
| Weight | 0.069 kg |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Outer diameter | 139 mm. 50 mm |
| Thickness | 101 mm |
| Inner diameter | 33 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Inner diameter 1 | 59 mm |
| Outer diameter 2 | 72 mm |
| Weight | 2.6 kg |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Placement on Vehicle | Right |
| Length | 730 mm |
| Housing Diameter | 18 mm |
| Eject Force | 315 N |
| Stroke | 308 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 390.5 mm |
| Weight | 0.341 kg |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Weight | 0.341 kg |
| Placement on Vehicle | Lower |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
| Hose Length | 290 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Rear Axle |
| Weight | 1.658 kg |
| Inspection Tag | ECE R90 Approved |
| Length | 131 mm |
| Width | 62.3 mm |
| Wear Warning Contact | incl. wear warning contact |
| Thickness/Strength 1 | 17.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Weight | 2.088 kg |
| Placement on Vehicle | Front Axle |
| Length | 131.8 mm |
| Width | 77.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Function | Wheel Bearing Kit |
| Weight | 0.680 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 35 mm |
| Outer diameter | 68 mm |
| Inner diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173913)
- 1x Febi Circlip (173903)
- 1x Febi Shaft Seal, wheel bearing (173902)
£30.47
Important compatibility info
| Weight | 0.302 kg |
| Seal Material | NBR (nitrile butadiene rubber) |
| Additional Information 2 | with oil sump gasket |
| Height | 54 mm |
| Width | 154 mm |
| Length | 178.2 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Transmission Type | 6-Speed Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.47
Important compatibility info
| Gasket inner diameter | 98 mm |
| Function | Fuel filter |
| Gasket outer diameter | 107.2 mm |
| Type | Fuel filter |
| Filter type | Filter Insert |
| Inner diameter | 17 mm |
| Outer diameter | 94 mm |
| Height | 115 mm |
| Weight | 0.174 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.47
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 588 mm |
| Housing Diameter | 19 mm |
| Eject Force | 590 N |
| Stroke | 168 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 354 mm |
| Weight | 0.38 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.47
Important compatibility info
| Type | Joint Kit, drive shaft |
| Weight | 2.170 kg |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 25 |
| External Teeth, Wheel Side | 42 |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.46
Important compatibility info
| Resistance | 1185 Ohm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 1870 mm |
| Weight | 0.157 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.46
Important compatibility info
| Weight | 0.039 kg |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 108131 |
| Number of Connectors / Ports | 2 |
| Cable Length | 510 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 107171 |
| Number of Connectors / Ports | 2 |
| Cable Length | 895 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.093 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Weight | 2.15 kg |
| Type | Suspension Spring |
| Length | 388 mm |
| Outer diameter | 152 mm |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Number of Coils | 5.1 |
| Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Number of mounting bores | 3 |
| Function | Central Slave Cylinder, clutch |
| for OE number | 2 019 956 |
| Weight | 0.378 kg |
| Type | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Weight | 0.180 kg |
| Opening Temperature | 95 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Resistance | 1185 Ohm |
| Additional Information | with bush |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 174326 |
| Number of Connectors / Ports | 2 |
| Weight | 0.148 kg |
| Cable Length | 3905 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Weight | 0.3 kg |
| Placement on Vehicle | both sides |
| Length | 500 mm |
| Housing Diameter | 18 mm |
| Eject Force | 574 N |
| Stroke | 171 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 276.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Weight | 0.227 kg |
| Cooling Hose | from engine to heat exchanger |
| Material | Plastic |
| Colour | Black |
| Function | Coolant Pipe |
| Extra Description | febi Plus |
| Additional Information 2 | with retaining strap |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.44
Important compatibility info
| Hose Length | 420 mm |
| Function | Charge Air Hose |
| Width | 75 mm |
| Turbocharger line | Charge air cooler to intake manifold |
| Wall Thickness | 5 mm |
| Weight | 0.72 kg |
| Type | Charge Air Hose |
| Placement on Vehicle | Charge Air Cooler, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.44
Important compatibility info
| Additional Information 2 | with piston clip |
| Weight | 2.41 kg |
| Placement on Vehicle | Front Axle |
| Length | 156.2 mm. 155.2 mm |
| Width | 75 mm. 73.2 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.5 mm. 19.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Model | CALIFORNIA CARAVELLE TRANSPORTER |
| Manufacturer | VOLKSWAGEN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.44
Important compatibility info
| Material | Aluminium |
| Weight | 0.900 kg |
| Paired article numbers | 31013 |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.44
Important compatibility info
| Weight | 3.56 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 264 mm |
| Thickness | 40.6 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.44
Important compatibility info
| Weight | 0.491 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 161 253 115 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Weight | 0.91 kg |
| Placement on Vehicle | Left |
| Colour | Yellow |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 652 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 2.264 kg |
| Additional Information 2 | with spacer disc |
| Type | Mounting, leaf spring |
| Function | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, leaf spring (26946)
- 1x Febi Spacer Ring, spring link console (26947)
£30.43
Important compatibility info
| Weight | 3.9 kg |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Outer diameter | 256 mm |
| Thickness | 41.1 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Paired article numbers | 109497 |
| Length | 900 mm |
| Placement on Vehicle | Right Rear |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Weight | 0.350 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Type | Bushing, axle beam |
| Weight | 0.670 kg |
| Function | Bushing, axle beam |
| Inner diameter | 14.4 mm |
| Outer diameter | 82.3 mm |
| Bearing/Mounting Type | Hydro Mount |
| Thickness | 89 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Type | Tie Rod |
| External Thread Size | M14 x 1,5, M12 x 1,5 |
| Function | Tie Rod |
| Paired article numbers | 182786 |
| Weight | 1.316 kg |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Right |
| Length | 413 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 3.064 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 234 mm |
| Thickness | 44.8 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 62.5 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| for OE number | 58411-B4300 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 170217 |
| Function | Sensor, wheel speed |
| Cable Length | 940 mm |
| Type | Sensor, wheel speed |
| Weight | 0.089 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Weight | 0.091 kg |
| Additional Information 2 | with seal ring |
| Length | 295 mm |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.42
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 540 mm |
| Additional Information | with rubber-metal mounts |
| Type | Rod/Strut, wheel suspension |
| Rod/Strut | Push Rod |
| Function | Rod/Strut, wheel suspension |
| Weight | 1.213 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.42
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.248 kg |
| Width | 65 mm |
| Material | PU (Polyurethane) |
| Length | 118 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (176381)
- 2x Febi Protective Cap/Bellow, shock absorber (45893)
£30.42
Important compatibility info
| Weight | 0.840 kg |
| Width | 18 mm. 20 mm |
| Outer diameter | 68 mm. 78 mm |
| Inner diameter | 41 mm. 45 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173865)
£30.42
Important compatibility info
| Weight | 0.06 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1000 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.41
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.242 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188231)
- 2x Febi Protective Cap/Bellow, shock absorber (195026)
£30.41
Important compatibility info
| Weight | 0.530 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.41
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023