Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.47 kg |
| Additional Information | with holder, with hose |
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.10
Important compatibility info
| Weight | 2.506 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 75 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.10
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
| Weight | 7.090 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (40687)
- 1x Febi Filter, cabin air (18759)
- 1x Febi Fuel filter (101080)
- 1x Febi Fuel filter (47974)
- 1x Febi Air Filter (170711)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
- 1x Febi Oil Filter (49868)
- 1x Febi Fuel filter (31397)
£162.10
Important compatibility info
| Weight | 6.35 kg |
| Material | Grey Cast Iron |
| Number of grooves | 2 |
| Number of Wings | 6 |
| Seal Material | Rubber/Metal |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 50 01 837 288 |
| Replaces | 33196 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.10
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 53 mm |
| Weight | 6.39 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.10
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.4 kg |
| Placement on Vehicle | Upper Right |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.06
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Throttle body |
| Weight | 0.658 kg |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.06
Important compatibility info
| Weight | 0.186 kg |
| Valve type | Pressure Limiting Valve |
| Function | Pressure Control Valve, common rail system |
| Extra Description | febi Plus |
| Type | Pressure Control Valve, common rail system |
| Number of Connectors / Ports | 2 |
| For fuel rail with OE No. | 611 070 04 95 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.06
Important compatibility info
| Weight | 0.840 kg |
| Placement on Vehicle | Intake Side |
| Thickness | 44 mm |
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Paired article numbers | 47572 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.93
Important compatibility info
| Placement on Vehicle | Left Front |
| Weight | 1.257 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.90
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Number of Chain Links | 158 |
| Weight | 1.176 kg |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48285)
- 1x Febi Tensioner, timing chain (108800)
- 1x Febi Guide, timing chain (107891)
- 1x Febi Guide, timing chain (108824)
- 1x Febi Gear/Sprocket, camshaft (108802)
- 1x Febi Sprocket, crankshaft (108825)
- 1x Febi Shaft Seal, crankshaft (107164)
£161.89
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 80 |
| Weight | 0.70 kg |
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | G53H-6, G53HRF-1 |
| Type | Chain Kit, oil pump drive |
| Wet Boiling Point | 189 °C |
| Replaces | 43667 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25388)
- 1x Febi Gear, balance shaft (25451)
- 1x Febi Gear, balance shaft (25453)
- 1x Febi Sprocket/Gear, oil pump (25454)
- 1x Febi Chain Tensioner, oil pump drive (32265)
£161.80
Important compatibility info
| Weight | 5.6 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 862 mm |
| Min. Length | 519 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.73
Important compatibility info
| Material | Grey Cast Iron |
| Number of grooves | 2 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Weight | 6.3 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 74 22 485 206 |
| Replaced by | 47123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.61
Important compatibility info
| Weight | 6.5 kg |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle |
| Type | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Port / Connector type | Voss Stecksystem 232 |
| Thickness | 580 mm. 185 mm |
| Outer diameter | 155 mm. 190 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.54
Important compatibility info
| External Thread Size | M14 x 1, M32 x 1,5 |
| Weight | 1.730 kg |
| Function | Housing, fuel filter |
| Type | Housing, fuel filter |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Housing, fuel filter (193464)
- 1x Febi Sensor, oil pressure (100939)
£161.49
Important compatibility info
| Length | 600 mm |
| Weight | 6.944 kg |
| Multi-piece | one-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.38
Important compatibility info
| Weight | 0.728 kg |
| Outer diameter | 80 mm |
| Operating Mode | Mechanical |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.28
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Additional Information | with insulating hood |
| Weight | 10.1 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm. 226 mm |
| Thickness | 250 mm. 595 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.24
Important compatibility info
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 78 mm |
| Weight | 6.3 kg |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023