Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 152 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Outer diameter | 84.5 mm |
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 51 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 24 |
| External Thread Size | M24 x 1,5 |
| Weight | 1.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Wire Diameter | 11.8 mm |
| Weight | 2.0 kg |
| Placement on Vehicle | Rear Axle |
| Length | 388 mm |
| Outer diameter | 113 mm |
| Number of Coils | 7.7 |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| for OE number | 60693147 SK |
| Weight | 0.444 kg |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Function | Inner Tie Rod |
| Outer diameter | 1 mm |
| Weight | 0.51 kg |
| Length | 304 mm |
| Additional Information 2 | with spacer disc |
| External Thread Size | M12 x 1,25, M14 x 1,25 |
| Type | Inner Tie Rod |
| for OE number | 45503-19185 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Weight | 0.122 kg |
| Function | Sensor, wheel speed |
| Cable Length | 830 mm |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 107658 |
| Placement on Vehicle | Rear Axle Left |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Resistance | 1150 Ohm |
| Cable Length | 2060 mm |
| Function | Sensor, wheel speed |
| Weight | 0.101 kg |
| Additional Information | with bush |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 347 mm |
| Outer diameter | 110 mm |
| Function | Suspension Spring |
| Weight | 1.35 kg |
| Wire Diameter | 10 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 175 mm |
| Width | 135 mm |
| Material | PU (Polyurethane) |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.416 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (173192)
- 2x Febi Rubber Buffer, suspension (170450)
£29.54
Important compatibility info
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Weight | 0.45 kg |
| Additional Information 2 | without lid |
| Type | Expansion Tank, coolant |
| Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Weight | 2.6 kg |
| Placement on Vehicle | Front Axle |
| Length | 444 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Outer diameter | 114 mm |
| Wire Diameter | 12.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Height | 175 mm |
| Outer diameter | 94 mm |
| Function | Hydraulic Filter, automatic transmission |
| Gasket outer diameter | 72 mm |
| Gasket inner diameter | 63 mm |
| Internal Thread Size | 1" - 12 UNF |
| Filter type | Spin-on Filter |
| Weight | 0.800 kg |
| Type | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Weight | 0.686 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Material | FPM (fluoride rubber), NBR (nitrile butadiene rubber) |
| Weight | 0.250 kg |
| Function | Gasket Set, wheel hub |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Weight | 2.06 kg |
| Wire Diameter | 13 mm |
| Placement on Vehicle | Front Axle |
| Length | 339 mm |
| Outer diameter | 165 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Width | 29 mm |
| Outer diameter | 130 mm |
| Inner diameter | 85 mm |
| Bearing Type | Tapered Roller Bearing |
| Placement on Vehicle | Rear Axle |
| Weight | 1.37 kg |
| Type | Bearing / Wheel Bearing |
| Function | Bearing / Wheel Bearing |
| Bearing Code | 32017XA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Weight | 0.516 kg |
| Placement on Vehicle | Front Axle |
| Length | 200 mm |
| Width | 108 mm |
| Material | PU (Polyurethane), Thermoplast |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (170024)
- 2x Febi Rubber Buffer, suspension (45074)
£29.54
Important compatibility info
| Outer diameter | 139 mm |
| Number of Coils | 7 |
| Function | Suspension Spring |
| Length | 359 mm |
| Placement on Vehicle | Front Axle |
| Wire Diameter | 12.5 mm |
| Weight | 2.56 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Weight | 2.000 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 07513 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Opening Temperature | 102 °C |
| Weight | 0.184 kg |
| Additional Information | with gasket/seal, with temperature sensor |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.416 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188604)
- 2x Febi Protective Cap/Bellow, shock absorber (109362)
£29.54
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023