Important compatibility info
Weight | 1.930 kg |
Wire Diameter | 12 mm |
Placement on Vehicle | Rear Axle |
Length | 318 mm |
Outer diameter | 108 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25, M16 x 1,5 |
Weight | 0.987 kg |
Placement on Vehicle | Front Axle Left |
Length | 415 mm |
Paired article numbers | 21489 |
Pipe Diameter | 14.5 mm |
Function | Tie Rod |
Type | Tie Rod |
Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Idler Arm |
Placement on Vehicle | Front Axle |
Spanner Size | 22 |
Weight | 1.21 kg |
External Thread Size | M14 x 1,5 |
Type | Idler Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Screen Filter, Spin-on Filter |
Width | 142 mm |
Outer diameter | 70 mm |
Additional Information 2 | with oil sump gasket, with seal ring |
Weight | 0.638 kg |
Internal Thread Size | M20 x 1,5 |
Length | 296.9 mm |
Height | 89 mm. 103 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.660 kg |
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
for OE number | 71739541 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information | with grease |
Thread Size | M20 x 1,0 |
External Teeth, Wheel Side | 33 |
Internal Teeth, wheel side | 25 |
Weight | 2.140 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.516 kg |
Placement on Vehicle | Front Axle |
Length | 200 mm |
Width | 108 mm |
Material | PU (Polyurethane), Thermoplast |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (170024)
- 2x Febi Rubber Buffer, suspension (45074)
Important compatibility info
Weight | 2.54 kg |
External Thread Size | M24 x 1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 160 mm |
Outer diameter | 91 mm |
External Teeth, Wheel Side | 30 |
Seal Diameter | 84.5 mm |
Internal Teeth, wheel side | 26 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 146 mm |
Voltage | 11.5 V |
Spanner Size | 10 |
Weight | 0.04 kg |
Glow Plug Type | after-glow capable |
Type | Glow Plug |
Function | Glow Plug |
External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Height | 160 mm |
Outer diameter | 98 mm |
Filter type | In-Line Filter, with filter heating |
Pipe Diameter | 10 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with quick couplers |
Weight | 0.36 kg |
Placement on Vehicle | Upper |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 12.8 mm |
Type | Suspension Spring |
Weight | 2.2 kg |
Placement on Vehicle | Front Axle |
Length | 354 mm |
Outer diameter | 156 mm |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 152 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Outer diameter | 84.5 mm |
External Teeth, Wheel Side | 25 |
Seal Diameter | 51 mm |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Internal Teeth, wheel side | 24 |
External Thread Size | M24 x 1,5 |
Weight | 1.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M18 x 1,5 |
Weight | 1.84 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 590 mm |
Thread Length | 76 mm |
Type | Tie Rod |
Function | Tie Rod |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.704 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 34457 |
Additional Information 2 | with ball bearing |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (34456)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
Important compatibility info
Number of Connectors / Ports | 7 |
Cable Length | 700 mm |
Function | Ignition Switch |
Type | Ignition Switch |
Weight | 0.170 kg |
Additional Information 2 | with cable, with plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front, Right Front |
Weight | 0.015 kg |
Number of Connectors / Ports | 4 |
Extra Description | febi Plus |
Type | Switch, window regulator |
Function | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
Weight | 0.059 kg |
Paired article numbers | 176059 |
Placement on Vehicle | Right |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 11.8 mm |
Weight | 2.0 kg |
Placement on Vehicle | Rear Axle |
Length | 388 mm |
Outer diameter | 113 mm |
Number of Coils | 7.7 |
Type | Suspension Spring |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Additional Information | without bulb |
Paired article numbers | 194133 |
Weight | 0.35 kg |
Type | Direction Indicator |
Fulfils ECE norm | R6, R7, R91 |
Function | Direction Indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023