Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Weight | 0.441 kg |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.37
Important compatibility info
| Weight | 0.516 kg |
| Length | 203 mm |
| Inner diameter | 50 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Hole Spacing | 182 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (171933)
- 1x Febi Bearing, propshaft centre bearing (05362)
£29.37
Important compatibility info
| Type | Bushing, axle beam |
| Weight | 0.670 kg |
| Function | Bushing, axle beam |
| Inner diameter | 14.4 mm |
| Outer diameter | 82.3 mm |
| Bearing/Mounting Type | Hydro Mount |
| Thickness | 89 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.36
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.224 kg |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188233)
- 2x Febi Protective Cap/Bellow, shock absorber (177076)
£29.35
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 125 mm |
| Function | Connector Cable, camshaft sensor |
| Weight | 0.027 kg |
| Extra Description | febi Plus |
| Type | Connector Cable, camshaft sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.35
Important compatibility info
| Weight | 0.050 kg |
| Type | Hand Feed Pump |
| Function | Hand Feed Pump |
| Extra Description | febi Plus |
| Material | PP (Polypropylene) |
| Length | 143 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.35
Important compatibility info
| Weight | 0.202 kg |
| Function | Holder, exterior mirror |
| Type | Holder, exterior mirror |
| Driver Position | for left-hand/right-hand drive vehicles |
| Material | PA (polyamide) |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.35
Important compatibility info
| Placement on Vehicle | Rear |
| Weight | 0.474 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.34
Important compatibility info
| Weight | 0.243 kg |
| Additional Information 2 | with retaining strap |
| Extra Description | febi Plus |
| Function | Coolant Pipe |
| Colour | Black |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.34
Important compatibility info
| Material | Metal |
| Thickness | 0.96 mm |
| Weight | 0.095 kg |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.33
Important compatibility info
| Weight | 0.18 kg |
| Width | 25 mm |
| Number of Teeth | 153 |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.33
Important compatibility info
| Weight | 0.38 kg |
| Material | Metal |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 85 mm |
| Width of castor bearing surface | 31 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Inner diameter | 17 mm |
| Mounting points diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.33
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Weight | 0.86 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.33
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.560 kg |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (44661)
- 1x Febi Rolling Bearing, suspension strut support mount (44491)
£29.33
Important compatibility info
| Function | Coolant Pipe |
| Extra Description | febi Plus |
| Type | Coolant Pipe |
| Cooling Hose | from thermostat to waterpump |
| Weight | 0.171 kg |
| Material | Plastic |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.32
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Bushing, axle beam |
| Outer diameter | 92 mm |
| Thickness | 86 mm |
| Inner diameter | 20 mm |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Weight | 0.495 kg |
| Material | Rubber/Metal |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.30
Important compatibility info
| Weight | 0.250 kg |
| Width | 32 mm |
| Outer diameter | 65.5 mm |
| Inner diameter | 8 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.30
Important compatibility info
| Housing length | 395.5 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 686 mm |
| Housing Diameter | 19 mm |
| Eject Force | 550 N |
| Stroke | 180 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.30
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 56 |
| Function | Chain, oil pump drive |
| Weight | 0.101 kg |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.30
Important compatibility info
| Length | 2835 mm |
| Function | V-Ribbed Belt |
| Number of Ribs | 9 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
| Weight | 0.434 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.30
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023