Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.980 kg |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 137 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Weight | 0.17 kg |
| Placement on Vehicle | transmission sided |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Function | Air Filter |
| Weight | 2.708 kg |
| Filter type | Filter Insert |
| Outer diameter | 227 mm |
| Inner diameter | 117 mm |
| Height | 370 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 44781 |
| Number of Connectors / Ports | 2 |
| Resistance | 1250 Ohm |
| Cable Length | 130 mm. 160 mm |
| Function | Sensor, wheel speed |
| Weight | 0.1135 kg |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Weight | 2.376 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Housing length | 368.5 mm |
| Placement on Vehicle | both sides |
| Length | 686 mm |
| Housing Diameter | 22 mm |
| Eject Force | 500 N |
| Stroke | 295 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, bonnet |
| Replaces | 26356 |
| Type | Gas Spring, bonnet |
| Weight | 0.518 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Function | Gas Spring, bonnet |
| Housing length | 357 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Stroke | 266 mm |
| Housing Diameter | 18 mm |
| Eject Force | 290 N |
| Length | 649 mm |
| Type | Gas Spring, bonnet |
| Placement on Vehicle | Left, Right |
| Weight | 0.313 kg |
| Replaces | 30878; 37084 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Eject Force | 380 N |
| Stroke | 271 mm |
| Placement on Vehicle | Right |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, bonnet |
| Housing length | 390.5 mm |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Weight | 0.324 kg |
| Housing Diameter | 18 mm |
| Length | 693 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 33 |
| Weight | 2.126 kg |
| Number of Teeth, ABS ring | 48 |
| ABS Ring Diameter | 81 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Weight | 0.63 kg |
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane) |
| Thickness | 154 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Weight | 0.481 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Front Axle |
| Length | 146 mm |
| Width | 142 mm |
| Material | Rubber/Metal |
| Outer diameter | 87 mm |
| Inner diameter | 35 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 28 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Weight | 0.085 kg |
| Paired article numbers | 175225 |
| Placement on Vehicle | Rear Axle Right |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Placement on Vehicle | Upper, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.53 kg |
| Type | Mounting, engine |
| for OE number | 3C0 199 867 E S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, engine (38401)
- 1x Febi Holder, engine mounting system (38402)
£28.54
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Weight | 0.2 kg |
| Paired article numbers | 181347 |
| Length | 507 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Brake Hose |
| Type | Brake Hose |
| Weight | 0.2 kg |
| Paired article numbers | 181346 |
| Length | 507 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Weight | 0.13 kg |
| Placement on Vehicle | transmission sided |
| Width | 156 mm |
| Thickness | 11 mm |
| Inner diameter | 93 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.54
Important compatibility info
| Weight | 0.874 kg |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Height | 54 mm |
| Placement on Vehicle | Front Axle Left |
| Width 2 | 134 mm |
| Width 1 | 151 mm |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.53
Important compatibility info
| Weight | 1.200 kg |
| Placement on Vehicle | Front Axle, Centre |
| Function | Tie Rod |
| Length | 527 mm. 121 mm |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.53
Important compatibility info
| Weight | 2.042 kg |
| Placement on Vehicle | Front Axle |
| Length | 148.8 mm |
| Width | 61.8 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.2 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023