Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Teeth | 52 |
| Function | Camshaft Adjuster |
| Weight | 0.802 kg |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (104319)
- 1x Febi Bolt, camshaft gear (104320)
£159.13
Important compatibility info
| Weight | 1.070 kg |
| Number of Connectors / Ports | 4 |
| Function | Relay Valve |
| Internal Thread Size | M16 x 1,5, M22 x 1,5 |
| Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.13
Important compatibility info
| Weight | 8.28 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 146 mm |
| Inner diameter | 96 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Hub (106992)
- 1x Febi Wheel Bearing (100733)
- 1x Febi Sensor Ring, ABS (49172)
- 1x Febi Circlip (106971)
- 1x Febi Thrust Washer, external planetary gearbox (107319)
- 1x Febi Washer (107318)
£159.13
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Weight | 9.6 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 61 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.13
Important compatibility info
| Weight | 2.5 kg |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | 7/16" - 24 UNS |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.13
Important compatibility info
| Lock System | with lock barrel, with two keys |
| Additional Information 2 | with switch, with bolts/screws |
| Number of Connectors / Ports | 6 |
| Weight | 0.987 kg |
| Type | Steering Lock |
| Function | Steering Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.13
Important compatibility info
| Type | Mounting, automatic transmission |
| Weight | 1.542 kg |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.12
Important compatibility info
| Weight | 1.180 kg |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 38 |
| Engine Management | Timing Belt |
| Function | Camshaft Adjuster |
| Internal Thread Size | M30 x 1 |
| Type | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.09
Important compatibility info
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Weight | 0.947 kg |
| Placement on Vehicle | Exhaust Side |
| Number of Teeth | 42 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.05
Important compatibility info
| Function | Water Recirculation Pump, parking heater |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Weight | 0.22 kg |
| Type | Water Recirculation Pump, parking heater |
| Replaces | 174489 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.53
Important compatibility info
| Weight | 1.12 kg |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Outer diameter | 143 mm |
| Inner diameter | 26 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.24
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.089 kg |
| Cable Length | 500 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.21
Important compatibility info
| External Teeth, Wheel Side | 31 |
| Weight | 6.806 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 669 mm |
| Wheel Sided Joint Diameter | 85.4 mm |
| Transmission-side joint diameter | 84.6 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Paired article numbers | 183463 |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
| Additional Information | with spring, with gasket/seal |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.14
Important compatibility info
| Weight | 7.64 kg |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Material | Grey Cast Iron |
| Number of Teeth | 23 |
| Seal Material | Rubber |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.14
Important compatibility info
| Type | Clutch Booster |
| Function | Clutch Booster |
| Fill Medium | Brake Fluid |
| Weight | 3.110 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.14
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 49 mm |
| Weight | 6.0 kg |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.14
Important compatibility info
| Additional Information | with nuts |
| Length | 866 mm |
| Material | Steel |
| Rod/Strut | Push Rod |
| Weight | 14.500 kg |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.14
Important compatibility info
| Fill Medium | Brake Fluid |
| Weight | 0.350 kg |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
| Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 1.076 kg |
| Width | 62 mm |
| Outer diameter | 100 mm |
| Inner diameter | 55 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.14
Important compatibility info
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 78 mm |
| Weight | 5.7 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£158.10
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023